N(C(C)C)(C(C)C)CC.[N:10]([CH2:19][C:20]#[CH:21])([Si:15]([CH3:18])([CH3:17])[CH3:16])[Si:11]([CH3:14])([CH3:13])[CH3:12].I[Si:23]([CH3:26])([CH3:25])[CH3:24]>C1(C)C=CC=CC=1>[CH3:16][Si:15]([CH3:18])([CH3:17])[N:10]([CH2:19][C:20]#[C:21][Si:23]([CH3:26])([CH3:25])[CH3:24])[Si:11]([CH3:12])([CH3:13])[CH3:14]A reactor with a capacity of 40 mL, equipped with a magnetic stirrer was filled, under argon atmosphere, with 0.0085 g (0.015 mmol) of [{Ir(μ-Cl)(CO)2}2], and then with 25 mL of anhydrous and deoxidized toluene and 0.7 g (5.4 mmol) of NEt(i-Pr)2. The whole mixture was stirred until the starting iridium(I) complex was dissolved, and then 0.598 g (3 mmol) of (Me3Si)2NCH2C≡CH and 0.96 g (4.8 mmol) of ISiMe3 were added to the resulting mixture. The reaction was carried out at a temperature of 80° C. until complete conversion of (Me3Si)2NCH2C≡CH. After the reaction was completed, in order to remove the catalyst from the reaction mixture the solvent was evaporated at a reduced pressure along with any residual unreacted substrates, and then anhydrous pentane was added to the residue. The resulting suspension was filtered and the resulting deposit was rinsed with two portions of a solvent. The solvent was initially evaporated from the filtrate, and the residual product was distilled by means of the “trap-to-trap” technique at a reduced pressure to obtain 1.45 g of 1-(N,N-bis(trimethyl-silyl)amino)-3-trimethylsilylprop-2-yne, obtained with a yield of 96%.