HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Reaction

Phosphorus sulfide (P2S5) → HCID 178528037, compound

HRID 590897
Print

Reaction equation

HRID 590897 reaction equation
[S-2].[Li+].[Li+].[P:4]12([S:16][P:14]3([S:17][P:7]([S:9][P:10]([S:13]3)([S:12]1)=[S:11])(=[S:8])[S:6]2)=[S:15])=[S:5].[I-:18].[Li+].[S:20]([Li:22])[Li:21]>CCCCCCC>[I-:18].[Li+:21].[S:20]([Li:22])[Li:21].[P:4]12([S:6][P:7]3([S:9][P:10]([S:13][P:14]([S:17]3)([S:16]1)=[S:15])(=[S:11])[S:12]2)=[S:8])=[S:5]
ParticipantsProcedureWorkupSources & evidenceReaction notes

Participants

6

Reactant 4

HCID 14817Phosphorus sulfide (P2S5)3×HCID 66321Lithium iodide2×HCID 10290727Dilithium SulfideHCID 178506969HCID 178506969, compound2×

Product 1

HCID 178528037HCID 178528037, compound

Reagents, catalysts & solvents 1

HCID 8900
Heptane
Solvent

Procedure

As the starting materials, lithium sulfide (Li2S), phosphorus pentasulfide (P2S5) and lithium iodide (LiI) were used. After measuring Li2S and P2S5 to have a molar ratio of Li2S:P2S5=75:25, LiI was measured to be 30 mol % so as to be mixed in an agate mortar together. Then, 1 g of the mixture was introduced into a 45 ml of zirconia pot, 4 g of dehydrated heptane (moisture content 30 ppm or less) was introduced, and furthermore, a zirconia ball (φ5.5 mm, 53 g) was introduced, and then the pot was completely sealed. With the pot mounted on a planetary type ball mill machine (P7™ produced by Fritsch Japan Co., Ltd.), a mechanical milling operation was carried out for 40 times with a 500 rpm base plate rotational frequency by a one hour process and 15 minutes pause cycle. Thereafter, the obtained specimen was dried on a hot plate set at 100° C. for removing the heptane so as to obtain a sulfide solid electrolyte material (sulfide glass, LiI—Li2S—P2S5).

Workup

  1. additionto be mixed in an agate mortar together
  2. additionwas introduced
  3. customthe pot was completely sealed
  4. customWith the pot mounted on a planetary type ball mill machine (P7™ produced by Fritsch Japan Co., Ltd.)
  5. customprocess and 15 minutes
  6. customThereafter, the obtained specimen was dried on a hot plate
  7. customset at 100° C.
  8. customfor removing the heptane so as

Sources & evidence

ORD record
ord-a70129eefc0c44ffaa31bc29e816473e
Source dataset
uspto-grants-2016_01
DOI
10.6084/m9.figshare.5104873.v1
Patent number
US09236158B2

Reaction notes

On this pageParticipantsProcedureWorkupSources & evidenceReaction notes