[Cl:1][C:2]1[CH:7]=[CH:6][C:5]([C:8]2[S:12][C:11]([C:13]([OH:15])=O)=[CH:10][CH:9]=2)=[CH:4][CH:3]=1.C([Li])CCC.CCCCCC.C[N:28]([CH:30]=O)C.[NH2:32]N.Cl>C1COCC1.CO.C([O-])(O)=O.[Na+]>[Cl:1][C:2]1[CH:3]=[CH:4][C:5]([C:8]2[S:12][C:11]3[C:13](=[O:15])[NH:32][N:28]=[CH:30][C:10]=3[CH:9]=2)=[CH:6][CH:7]=1To a solution of 5-(4-chlorophenyl)thiophene-2-carboxylic acid (890 mg, 3.73 mmol) in anhydrous THF (40 ml) under N2 at −78° C. was added a solution of 1.6 M n-butyllithium in hexane (5.83 ml, 9.32 mmol). The reaction was allowed to warmed to 0° C. over 3 hours whereupon the solution was cooled to −78° C. prior to addition of DMF (2.89 ml, 37.3 mmol). After stirring the mixture at −50° C. for 2 hours, the reaction was quenched with aqueous 1 N HCl (20 ml) prior to extraction with EtOAc (40 ml). The EtOAc extracts were dried over Na2SO4 and concentrated to give light brown solid. Following dissolution of the brown solid in MeOH (20 ml), hydrazine (0.351 ml, 11.19 mmol) was added, followed by conc. HCl (1 ml). The mixture was stirred at reflux for 2 days; whereupon after cooling to RT, the mixture was diluted with a solution of saturated NaHCO3 (15 ml). The resulting precipitate was collected by filtration, washed with water and EtOAc to yield after drying 2-(4-chlorophenyl)thieno[3,2-d]pyridazin-7(6H)-one (860 mg, 3.28 mmol, 87% yield) as brown solid. LC MS at t=2.25 min. (m+H=263) PHENOMENEX® S5 C18 4.6×30 mm column/water-MeOH-TFA 90:10:0.1 to 10:90:0.1 gradient over 2 min at 5 mL/min with 1 min hold at the end of the gradient. 1H NMR (400 MHz, DMSO) δ ppm 7.59 (d, J=8.56 Hz, 2H), 7.88 (d, J=8.56 Hz, 2H), 7.99 (s, 1H), 8.40 (s, 1H), 12.99 (s, 1H)
読み込み中…
