ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

Itaconic acid → Lactic acid itaconic acid

HRID 1044466
印刷

反応式

HRID 1044466 の反応式
[C:1]([OH:6])(=[O:5])[C@H:2]([CH3:4])[OH:3].[C:7]([OH:15])(=[O:14])[C:8]([CH2:10][C:11]([OH:13])=[O:12])=[CH2:9].OCC(CO)(CO)CO.[Sn+2]>O>[C:1]([OH:6])(=[O:5])[CH:2]([CH3:4])[OH:3].[C:7]([OH:15])(=[O:14])[C:8]([CH2:10][C:11]([OH:13])=[O:12])=[CH2:9]
参加物反応条件実験手順後処理出典と根拠反応ノート

参加物

6

反応物 4

HCID 811Itaconic acidHCID 8285PentaerythritolHCID 104883Stannous cationHCID 107689L-Lactic Acid

生成物 1

HCID 86597549Lactic acid itaconic acid

試薬・触媒・溶媒 1

HCID 962Water溶媒

反応条件

温度
180 °C

実験手順

Into a 2 liter Rotavapor equipment, used as the reactor, 437.5 g of L-lactic acid was added (88% water solution corresponding to 89 mole-%), 47.9 g of itaconic acid (9 mole-%), 14.5 g of pentaerythritol (2 mole-%) and 0.19 g of tin(II) octoate. Dry nitrogen was led into the reactor and a 500 mbar absolute pressure was established. The reactor vessel was partly immersed in an oil bath with a temperature of 90° C. The temperature of the oil bath was increased at a rate of 30° C./h to 120° C., and the reaction mixture was mixed by starting the rotation at a speed of 100 rpm. The temperature of the oil bath was evenly increased by 15° C./h until 180° C., where it was kept until the end of the polymerisation. The pressure was decreased every hour by the following steps: 500 (start)—500-450-400-350-290-190-140-90-60-50-40-30 mbar, at which pressure it was kept to the end of the polymerisation. Bubbling of nitrogen was continued throughout the polymerisation and the formed water was collected as it evolved. Total polymerisation time was 24 hours.

後処理

  1. customThe reactor vessel was partly immersed in an oil bath with a temperature of 90° C
  2. temperatureThe temperature of the oil bath was increased at a rate of 30° C./h to 120° C.
  3. additionthe reaction mixture was mixed
  4. customwhere it was kept until the end of the polymerisation
  5. waitThe pressure was decreased every hour by the following steps
  6. custom500 (start)—500-450-400-350-290-190-140-90-60-50-40-30 mbar, at which pressure it was kept to the end of the polymerisation
  7. customBubbling of nitrogen
  8. customwas continued throughout the polymerisation
  9. customthe formed water was collected as it
  10. customTotal polymerisation time

出典と根拠

ORDレコード
ord-18c60520748747cdb4b8e368fa21c1d6
出典データセット
uspto-grants-2013_10
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US08563664B2

反応ノート

このページの内容参加物反応条件実験手順後処理出典と根拠反応ノート