Ethanol → Ethyl 4-chloro-3-ethoxy-2-butenoate

温度

130 °C

206.6 g (0.47 mol) of a 35 percent mixture of 4-chloroacetoacetyl chloride in methylene chloride was cooled to -10° C. Under nitrogen, 147.2 g (3.2 mol) of ethanol was added in 30 minutes, and then 83.3 g (0.7 mol) of thionyl chloride was added in 30 minutes (formation of diethyl sulfite). The temperature was raised to 55° to 60° C. in an hour, and then it was stirred for 1 hour more at 55° to 60° C. Then the excess ethanol and methylene chloride was distilled off at reduced pressure. The residue (raw 4-chloro-3,3-diethoxybutanoic acid ester) was mixed with 0.27 g of methanesulfonic acid and warmed at a pressure of 75 mbars to 125° to 130° C. Thus, the formed ethanol and excess diethyl sulfite were distilled off. The residue (raw 4-chloro-3- ethoxy -but-2E-enoic acid ethyl ester) was taken up in 110.2 g (120 ml) of toluene and the organic phase was washed with 69.8 g of aqueous 16 percent HCl for 30 minutes, with 32.1 g of an aqueous 10 percent sodium chloride solution for 10 minutes, with 134 g of aqueous 10 percent NaOH for 75 minutes and finally with 32.1 g of aqueous 10 percent sodium chloride solution for 10 minutes. The toluene was then evaporated off and the residue was distilled at a pressure of 2 mbars and a temperature of 78° to 80° C. 4-chloro-3-ethoxy-but-2E-enoic acid ethyl ester was obtained in a yield of 80.6 g (88.5 percent) in a purity of 99.8 percent (GC).

1. temperatureThe temperature was raised to 55° to 60° C. in an hour
2. distillationThen the excess ethanol and methylene chloride was distilled off at reduced pressure
3. additionThe residue (raw 4-chloro-3,3-diethoxybutanoic acid ester) was mixed with 0.27 g of methanesulfonic acid
4. distillationThus, the formed ethanol and excess diethyl sulfite were distilled off
5. washthe organic phase was washed with 69.8 g of aqueous 16 percent HCl for 30 minutes, with 32.1 g of an aqueous 10 percent sodium chloride solution for 10 minutes, with 134 g of aqueous 10 percent NaOH for 75 minutes and finally with 32.1 g of aqueous 10 percent sodium chloride solution for 10 minutes
6. customThe toluene was then evaporated off
7. distillationthe residue was distilled at a pressure of 2 mbars
8. customa temperature of 78° to 80° C

ORDレコード

ord-0e36fbac346d46798eea345f42fffb40

出典データセット

uspto-grants-1990_10

DOI

10.6084/m9.figshare.5104873.v1

特許番号

US04966989