ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

Dichloromethane → 4-(Perfluoro3-iodopropyl)phenyl acetate

HRID 1112134
印刷

反応式

HRID 1112134 の反応式
[C:1]([O:4][C:5]1[CH:10]=[CH:9][C:8](I)=[CH:7][CH:6]=1)(=[O:3])[CH3:2].[I:12][C:13]([F:22])([F:21])[C:14]([F:20])([F:19])[C:15]([F:18])([F:17])I.[Cl-].[NH4+].C(Cl)Cl>CS(C)=O.[Cu]>[C:1]([O:4][C:5]1[CH:10]=[CH:9][C:8]([C:15]([F:18])([F:17])[C:14]([F:20])([F:19])[C:13]([F:22])([F:21])[I:12])=[CH:7][CH:6]=1)(=[O:3])[CH3:2]
参加物反応条件実験手順後処理出典と根拠反応ノート

参加物

7

反応物 4

HCID 6344DichloromethaneHCID 25517Ammonium ChlorideHCID 1417934-IodophenylacetateHCID 109164621,1,2,2,3,3-Hexafluoro-1,3-diiodopropane

生成物 1

HCID 213310104-(Perfluoro3-iodopropyl)phenyl acetate収率 57.4%

試薬・触媒・溶媒 2

HCID 23978
Copper
触媒
2 回
HCID 679Dimethyl Sulfoxide溶媒

反応条件

温度
120 °C

実験手順

A solution of p-iodophenyl acetate (27.5 g, 105 mmol) and 1,3-diiodohexafluoropropane (52.0 g, 128.7 mmol) in 100 ml of anhydrous dimethyl sulfoxide was heated to 120° C. under nitrogen. Copper powder (13.5 g, 211 g atoms) was added to the vigorously stirred solution in five approximately equal amounts at 20 minute intervals. After the addition of copper was complete, the reaction mixture was stirred at 120° C. for an additional 1.5 hours. On cooling, saturated aqueous ammonium chloride together with methylene chloride was added to the reaction vessel. The excess copper and cuprous salts were filtered off, the organic layer was separated, and the aqueous layer was extracted with more methylene chloride. The organic extracts were combined, washed well with water, dried over anhydrous magnesium sulfate, and reduced in volume to a light yellow oil. The oil was refluxed in 25 ml of acetic anhydride for 45 minutes and the excess acetic anhydride and acetic acid were vacuum distilled. Distillation of the residual oil yielded 24.85 g of crude 4-(perfluoro3-iodopropyl)phenyl acetate, bp 126°-127° C./3.4 mm Hg, mp 75°-81° C. Recrystallization of this material from hexane gave 20.8 g (48% yield) of purer material, mp 84.5°-88° C. Repeated crystallization from hexane raised the melting point to 88.5°-89.5° C., which could not be improved upon by further recrystallization.

後処理

  1. temperatureOn cooling
  2. filtrationThe excess copper and cuprous salts were filtered off
  3. customthe organic layer was separated
  4. extractionthe aqueous layer was extracted with more methylene chloride
  5. washwashed well with water
  6. dry with materialdried over anhydrous magnesium sulfate
  7. temperatureThe oil was refluxed in 25 ml of acetic anhydride for 45 minutes
  8. distillationdistilled
  9. distillationDistillation of the residual oil

出典と根拠

ORDレコード
ord-e539d2d715ea47c1906575ada128c31b
出典データセット
uspto-grants-1978_10
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US04120900

反応ノート

このページの内容参加物反応条件実験手順後処理出典と根拠反応ノート