ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

Chlorotrimethylsilane → (S)-2-Amino-6,6-dimethoxyhexanoic acid, methyl ester

HRID 1276697
印刷

反応式

HRID 1276697 の反応式
Cl[Si](C)(C)C.[NH2:6][C@@H:7]([CH2:11][CH2:12][CH2:13][CH:14]1[O:18][CH2:17][CH2:16][O:15]1)[C:8]([OH:10])=[O:9].S(OC)(O[CH3:22])=O.C[O-].[K+]>CO.C(OCC)(=O)C>[NH2:6][C@@H:7]([CH2:11][CH2:12][CH2:13][CH:14]([O:18][CH3:17])[O:15][CH3:16])[C:8]([O:10][CH3:22])=[O:9]
参加物反応条件実験手順後処理出典と根拠反応ノート

参加物

7

反応物 4

HCID 6397ChlorotrimethylsilaneHCID 69223Dimethyl sulfiteHCID 11041524Allysine ethylene acetalHCID 23664618Potassium methoxide

生成物 1

HCID 10130457(S)-2-Amino-6,6-dimethoxyhexanoic acid, methyl ester収率 77.8%

試薬・触媒・溶媒 2

HCID 887Methanol
溶媒
HCID 8857Ethyl Acetate溶媒

反応条件

温度
42.5 °C

実験手順

Under nitrogen, chlorotrimethylsilane (28.0 g) was added to a slurry of (S)-α-amino-1,3-dioxolane-2-pentanoic acid (20.9 g) and dimethyl sulfite (12.0 g) in methanol (240 ml) to afford a homogeneous solution. Following the observation of an exotherm to 29° C., the solution was heated to 40-45° C., stirred at that temperature for 8 hours and at about 22° C. for up to 72 hours. In-process HPLC analysis showed that the reaction was complete (about 93 M% conversion to product) and the resulting solution was cooled to -5 to -10° C. With stirring, the apparent pH of the mixture was adjusted to 11.7 to 11.9 by the slow careful addition of 32 wt. % (or 4.45 M) methanolic potassium methoxide solution (70 ml) maintaining the temperature in the range of -5 to 0° C. Analysis of the product slurry (1H-NMR) indicated that the neutralizaiton was complete. The solvent of the product slurry was exchanged with ethyl acetate by first concentrating the thin slurry under vacuum at less than 30° C. to 300 ml volume followed by the addition of ethyl acetate until the removal of methanol was completed as judged by in-process GC analysis (less than 1 AP). Upon completion of the solvent exchange, the batch volume was adjusted to about 400 ml with ethyl acetate and the resulting slurry was filtered. Poly(acrylic acid co-acrylamide), potassium salt (3.0 to 3.2 g) and water (30-32 ml) were added to the filtrate. The mixture was stirred for about 35 minutes and filtered. Optionally, wet the poly (acrylic acid co-acrylamide), potassium salt treatment can be repeated on the filtrate if the quantity of ethylene glycol exceeds 0.15 equivalents, as judged by in-process GC analysis. Following in-process HPLC analysis, 17.4 g of the title product was obtained as an ethyl acetate solution in 80.8 M % yield.

後処理

  1. customto afford a homogeneous solution
  2. customto 29° C.
  3. temperaturethe resulting solution was cooled to -5 to -10° C
  4. stirringWith stirring
  5. temperaturemaintaining the temperature in the range of -5 to 0° C
  6. concentrationby first concentrating the thin slurry under vacuum at less than 30° C. to 300 ml volume
  7. additionfollowed by the addition of ethyl acetate until the removal of methanol
  8. filtrationthe resulting slurry was filtered
  9. additionPoly(acrylic acid co-acrylamide), potassium salt (3.0 to 3.2 g) and water (30-32 ml) were added to the filtrate
  10. stirringThe mixture was stirred for about 35 minutes
  11. filtrationfiltered

出典と根拠

ORDレコード
ord-88383a8e7f5944ba8bf64d1fd7f22759
出典データセット
uspto-grants-2000_12
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US06166227

反応ノート

このページの内容参加物反応条件実験手順後処理出典と根拠反応ノート