ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

1-Octene → Octene-1 7-methyl-1,6-octadiene

HRID 1707723
印刷

反応式

HRID 1707723 の反応式
[CH3:1][CH2:2][CH2:3][CH2:4][CH2:5][CH2:6][CH2:7][CH2:8]CC.CCCCCCC=C.[CH3:19][C:20]([CH3:27])=[CH:21][CH2:22][CH2:23][CH2:24][CH:25]=[CH2:26].[H][H].C([Al](CC(C)C)CC(C)C)C(C)C.C[Si](C)(C)OCC>[Ti].CO.C(O)C(C)C>[CH3:8][CH2:7][CH2:6][CH2:5][CH2:4][CH2:3][CH:2]=[CH2:1].[CH3:19][C:20]([CH3:27])=[CH:21][CH2:22][CH2:23][CH2:24][CH:25]=[CH2:26]
参加物実験手順後処理出典と根拠反応ノート

参加物

10

反応物 6

HCID 81251-OcteneHCID 15600DecaneHCID 15772EthoxytrimethylsilaneHCID 5575797-Methyl-1,6-octadieneHCID 16682931TriisobutylaluminumHCID 178418361HCID 178418361、化合物

生成物 1

HCID 131718731Octene-1 7-methyl-1,6-octadiene

試薬・触媒・溶媒 3

HCID 23963Titanium触媒HCID 887Methanol溶媒HCID 6560Isobutanol溶媒

実験手順

A 500 ml polymerizer equipped with an agitating element was charged with 142 ml of decane, 100 ml of octene-1 and 8 ml of 7-methyl-1,6-octadiene. Into this solution elevated in temperature to 50° C. were introduced continuously hydrogen and nitrogen at rates of 1 liter and 50 liters per hour, respectively. The polymerizer was then charged with 0.625 mmol of triisobutylaluminum, 0.21 mmol of trimethylethoxysilane and 0.0125 mmol, in terms of titanium atom, of the solid titanium catalyst component [A] to initiate polymerization. After a thirty-minute polymerization at 50° C., the polymerization was stopped by the addition of small amounts of isobutyl alcohol to the system, and the resulting polymer solution was then poured in large amounts of methanol to separate out a copolymer. The copolymer was recovered and dried at 120° C. under reduced pressure overnight to give 12.4 g of octene-1/7-methyl-1,6-octadiene copolymer. The intrinsic viscosity [η], as measured in decahydronaphthalene at 135° C., of the thus obtained copolymer was 6.4 dl/g, and the content of 7-methyl-1,6-octadiene in the copolymer was 6.6 mol %.

後処理

  1. customA 500 ml polymerizer equipped with an agitating element
  2. customelevated in temperature to 50° C.
  3. custompolymerization
  4. customAfter a thirty-minute polymerization at 50° C.
  5. customto separate out a copolymer
  6. customThe copolymer was recovered
  7. customdried at 120° C. under reduced pressure overnight

出典と根拠

ORDレコード
ord-8e0383bbbd9c4b2a96c22c1b03c389eb
出典データセット
uspto-grants-1994_10
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US05354828

反応ノート

このページの内容参加物実験手順後処理出典と根拠反応ノート