ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

Hydrochloric Acid → 4-(1-Ethyl-4-oxido-1,4-azaphosphinan-4-yl)aniline hydrochloride

HRID 1890125
印刷

反応式

HRID 1890125 の反応式
[CH2:1]([N:3]1[CH2:8][CH2:7][P:6](=[O:18])([C:9]2[CH:14]=[CH:13][C:12]([N+:15]([O-])=O)=[CH:11][CH:10]=2)[CH2:5][CH2:4]1)[CH3:2].[ClH:19].[H][H]>C(O)C.[Pd]>[ClH:19].[CH2:1]([N:3]1[CH2:4][CH2:5][P:6]([C:9]2[CH:14]=[CH:13][C:12]([NH2:15])=[CH:11][CH:10]=2)(=[O:18])[CH2:7][CH2:8]1)[CH3:2]
参加物実験手順後処理出典と根拠反応ノート

参加物

6

反応物 3

HCID 313Hydrochloric AcidHCID 674791721-Ethyl-4-(4-nitro-phenyl)-perhydro-1,4-azaphosphorine 4-oxideHCID 178418361HCID 178418361、化合物

生成物 1

HCID 674788444-(1-Ethyl-4-oxido-1,4-azaphosphinan-4-yl)aniline hydrochloride

試薬・触媒・溶媒 2

HCID 23938Palladium触媒HCID 702
Ethanol
溶媒
2 回

実験手順

A mixture of 1-bromo-4-nitrobenzene (400 mg, 2.00 mmol), tetrakis(triphenylphosphine)palladium(0) (120 mg, 0.20 mmol) and cesium carbonate (734 mg, 2.2 mmol) in a 30 mL microwave vial was purged and backfilled with nitrogen. Tetrahydrofuran (20 mL) was added followed by diethyl phosphite (0.360 mL, 2.8 mmol). The mixture was vortexed, then microwaved for 45 minutes at 120° C. Reaction was repeated three times to achieve total scale then the combined reaction mixtures were purified via chromatography (120 g silica gel 5%→75% ethyl acetate in hexane). (4-Nitro-phenyl)-phosphonic acid diethyl ester isolated as a light yellow oil (969 mg, 47%). 1H NMR (400 MHz, (D3C)2SO, δ, ppm): 8.35 (d, J=8.0 Hz, 2H), 7.16 (s, 1H), 5.93 (s, 2H), 3.40 (s, 4H), 2.36 (s, 4H), 2.20 (s, 3H), 8.05-7.95 (m, 2H), 4.09 (m, 4H), 1.25 (t, J=13.8, 7.4 Hz, 6H). 411b) To a solution of (4-Nitro-phenyl)-phosphonic acid diethyl ester (2.31 g, 8.91 mmol) in N,N-dimethylformamide (1 mL) was added thionyl chloride (3.25 mL, 44.6 mmol). The reaction mixture was heated to reflux for 2 hours, cooled to room temperature and concentrated in vacuo. The residue was azeotroped with carbon tetrachloride several times to remove excess thionyl chloride. 4-Nitrophenylphosphonic dichloride was carried on crude to the next reaction. 411c) To a solution of 4-Nitrophenylphosphonic dichloride (2.14 g, 8.91 mmol) in tetrahydrofuran at −78° C. was added vinylmagnesium bromide (2.34 g, 17.8 mmol). The solution was stirred at −78° C. for one hour then quenched by the addition of ammonium chloride solution. The mixture was extracted with dichloromethane. The combined organic layers were dried and concentrated. 4-(Divinyl-phosphinoyl)nitro benzene was isolated as a brown-yellow oil (1.69 g, 85%). MS=224 (MH)+. 411d) A mixture of 4-(Divinyl-phosphinoyl)nitro benzene (1.69 g, 7.56 mmol), water (10 mL), 1.0 M of sodium hydroxide in water (7.56 mL, 7.56 mmol) and tetrahydrofuran (10.0 mL, 123 mmol) was treated with ethylamine hydrochloride (678 mg, 8.32 mmol) then heated at 105° C. for one hour. An additional portion of ethylamine hydrochloride was added and the reaction was heated for an additional 2 hours. The reaction was cooled, poured into saturated sodium bicarbonate solution and extracted with dichloromethane. The aqueous layer was treated with solid sodium chloride and extracted and additional 4 times to isolate all the product. The combined organic layers were dried over magnesium sulfate, filtered and evaporated. The residue was purified via chromatography (40 g silica gel and 0%→10% methanol in dichloromethane). 1-Ethyl-4-(4-nitro-phenyl)-perhydro-1,4-azaphosphorine 4-oxide was isolated as yellow oil (300 mg, 10%). 1H NMR (400 MHz, (D3C)2SO, δ, ppm): 8.34 (d, J=8.4 Hz, 2H), 8.11 (t, J=18.46, 9.15 Hz, 2H), 2.91-2.75 (m, 4H), 2.51-2.46 (m, 2H), 2.29 (m, 2H), 1.96 (m, 2H), 1.01 (t, J=14.4, 7.5 Hz, 3H). MS=269 (MH)+. 411e) 1-Ethyl-4-(4-nitro-phenyl)-perhydro-1,4-azaphosphorine 4-oxide (269.80 mg, 1.0058 mmol) dissolved in Ethanol (50 mL) and treated with palladium on carbon 10% (90:10, carbon black:Palladium, 30 mg, 2 mmol), 2.5 M of hydrogen chloride in ethanol (1.21 mL, 3.02 mmol) and 50 PSI of hydrogen gas. The mixture was shaken on a Parr apparatus for 5 hours. The mixture was degassed and backflushed with nitrogen. The mixture was filtered through a plug of diatomaceous earth and washed with ethanol. The filtrate was evaporated. 4-(1-ethyl-4-oxido-1,4-azaphosphinan-4-yl)aniline hydrochloride was isolated (401 mg, 145%). MS=238 (MH)+. 411f) N-[4-(1-ethyl-4-oxido-1,4-azaphosphinan-4-yl)phenyl]-8-[4-(methylsulfonyl)phenyl][1,2,4]triazolo[1,5-a]pyridin-2-amine was prepared from 2-Chloro-8-(4-methanesulfonyl-phenyl)-[1,2,4]triazolo[1,5-a]pyridine (133 mg, 0.434 mmol) and 4-(1-ethyl-4-oxido-1,4-azaphosphinan-4-yl)aniline hydrochloride (131.01 mg, 0.47689 mmol) in a manner analogous to Example 2d. Product isolated as an off-white solid (31.56 mg, 14%). 1H NMR (400 MHz, CDCl3, δ, ppm): 8.54 (d, J=8.3 Hz, 1H), 8.23 (d, J=8.0 Hz, 2H), 8.01 (d, J=8.0 Hz, 2H), 7.80-7.67 (m, 5H), 7.08 (t, J=13.6, 7.0 Hz, 1H), 3.13-2.90 (m, 7H), 2.61 (m, 2H), 2.27-2.02 (m, 4H), 1.13 (t, J=13.6, 6.4 Hz, 3H). MS=510 (MH)+.

後処理

  1. customThe mixture was degassed
  2. filtrationThe mixture was filtered through a plug of diatomaceous earth
  3. washwashed with ethanol
  4. customThe filtrate was evaporated

出典と根拠

ORDレコード
ord-14e58c2b9e104971ba0508528ec98a39
出典データセット
uspto-grants-2013_08
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US08501936B2

反応ノート

このページの内容参加物実験手順後処理出典と根拠反応ノート