[Na].[CH3:2][CH:3]([C:9](OCC)=O)[C:4]([O:6]CC)=[O:5].[CH3:14][C:15]1[CH:22]=[CH:21][C:18](CBr)=[CH:17][CH:16]=1.[OH-].[K+]>C(O)C.O>[CH3:14][C:15]1[CH:22]=[CH:21][C:18]([CH2:9][CH:3]([CH3:2])[C:4]([OH:6])=[O:5])=[CH:17][CH:16]=1.[C:4](=[O:6])=[O:5]In a three-necked round-bottom 2000 ml flask equipped with a reflux condenser, a pressure-equalizing dropping funnel, and magnetic stirring bar, 18.9 g (0.82 mol) of sodium metal was dissolved in 450 ml of dry ethanol. To the resulting solution, 137 g (0.79 mol) of diethyl 2-methylmalonate was added dropwise within 15 minutes. This mixture was stirred for 15 minutes; then, 146 g (0.79 mol) of p-methylbenzyl bromide was added with vigorous stirring at a rate that allowed the reaction mixture to maintain a gentle reflux. Additionally, this mixture was refluxed for 4 hours, then cooled to room temperature. A solution of 151 g of potassium hydroxide in 500 ml of water was added. This mixture was refluxed for 2 hours to saponificate the ester formed. Ethanol and water were distilled off. To the residue, 500 ml of water, and then 12 M HCl (to pH 1) were added. Crude 2-(4-methylphenyl)-2-methylmalonic acid precipitated along with potassium chloride. This precipitate was filtered off and washed with 500 ml of CH2Cl2. The solution obtained was evaporated to dryness to give crude substituted methylmalonic acid. This acid was decarboxylated by heating for 2 hours at 180° C. to form crude 3-(4-methylphenyl)-2-methylpropionic acid (and CO2 as a byproduct). The crude 3-(2-bromophenyl)-2-methylpropionic acid was used without further purification. A mixture of this acid and 200 ml of SOCl2 was refluxed for 3 hours. Then, thionyl chloride was distilled off in vacuum. Fractional distillation gave the title product, b.p. 93-95° C./1 mm Hg. Yield, 181 g (72%) of a colorless oil.
読み込み中…
