ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

Phenylboronic Acid → 3-Amino-biphenyl-2-carbonitrile

HRID 2036780
印刷

反応式

HRID 2036780 の反応式
[NH2:1][C:2]1[CH:9]=[CH:8][CH:7]=[C:6](Br)[C:3]=1[C:4]#[N:5].C([O-])(=O)C.[K+].[C:16]1(B(O)O)[CH:21]=[CH:20][CH:19]=[CH:18][CH:17]=1>C1(C)C=CC=CC=1>[NH2:1][C:2]1[CH:9]=[CH:8][CH:7]=[C:6]([C:16]2[CH:21]=[CH:20][CH:19]=[CH:18][CH:17]=2)[C:3]=1[C:4]#[N:5]
参加物反応条件実験手順後処理出典と根拠反応ノート

参加物

5

反応物 3

HCID 66827Phenylboronic AcidHCID 517044Potassium AcetateHCID 98130382-Amino-6-bromobenzonitrile

生成物 1

HCID 463118033-Amino-biphenyl-2-carbonitrile

試薬・触媒・溶媒 1

HCID 1140Toluene溶媒

反応条件

温度
110 °C

実験手順

2-Amino-6-bromo-benzonitrile (1.0 Kg, 5.07 moles) and toluene (10 L, 10 vol) were added to a 20 L glass-lined reactor equipped with mechanical stirrer under inert atmosphere. Potassium acetate (996 g, 10.16 moles) and phenylboronic acid (866, 7.10 moles) were added into the solution and the solution was degassed with nitrogen for 30 min. After this time, dichloro-bis(triphenylphosphine) palladium (II) (17.8 g, 0.025 moles) was added to the reaction mixture at ambient temperature. The mixture was heated to 110° C., where it stirred for 17 h. At the conclusion of this period, the reaction progress was monitored by HPLC, which indicated the reaction was completed. The reaction mixture was filtered through a celite bed. The filtrate was transferred back to the reactor and concentrated hydrochloric acid (˜35%, 2 L, 2 vol) was charged to the reactor at ambient temperature. The HCl salt of the title compound precipitated out from the reaction and was collected by filtration. The HCl salt was transferred into the 20 L reactor and then made basic with 10% NaOH solution (pH 8-9). The resulting product was extracted with ethyl acetate (10 L, 10 vol). The ethyl acetate layer was washed with water (5 L, 5 vol) and then the solvent was evaporated under vacuum to give a residue. Hexanes (5 L, 5 vol) were added to the residue at 35-40° C., and the resulting slurry was cooled to ambient temperature. Once at the prescribed temperature, the product was collected by filtration to provide a pale yellow solid (802 g, 81.4%, 99% by HPLC). 1H NMR (DMSO-D6, 400 MHz, δ ppm); 7.43-7.52 (m, 5H), 7.33-7.37 (m, 1H), 6.83 (d, J=8 Hz, 1H), 6.62 (d, J=8 Hz, 1H), 6.1 (s, 2H). ES-MS: [M++1]=194.23.

後処理

  1. customequipped with mechanical stirrer under inert atmosphere
  2. customthe solution was degassed with nitrogen for 30 min
  3. filtrationThe reaction mixture was filtered through a celite bed
  4. additionwas charged to the reactor at ambient temperature
  5. customThe HCl salt of the title compound precipitated out from the reaction
  6. filtrationwas collected by filtration
  7. extractionThe resulting product was extracted with ethyl acetate (10 L, 10 vol)
  8. washThe ethyl acetate layer was washed with water (5 L, 5 vol)
  9. customthe solvent was evaporated under vacuum
  10. customto give a residue
  11. temperaturethe resulting slurry was cooled to ambient temperature
  12. filtrationOnce at the prescribed temperature, the product was collected by filtration
  13. customto provide a pale yellow solid (802 g, 81.4%, 99% by HPLC)

出典と根拠

ORDレコード
ord-e102401db5bb4caba8961331643b05f7
出典データセット
uspto-grants-2013_11
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US08575184B2

反応ノート

このページの内容参加物反応条件実験手順後処理出典と根拠反応ノート