ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

Nitrogen → 2-Propenamide, 2-methyl-N-(4-(phenylamino)phenyl)-

HRID 2059347
印刷

反応式

HRID 2059347 の反応式
C[O-].[Na+].N#N.[CH:6]1[CH:11]=[CH:10][C:9]([NH:12][C:13]2[CH:18]=[CH:17][C:16]([NH2:19])=[CH:15][CH:14]=2)=[CH:8][CH:7]=1.C[O:21][C:22](=O)[C:23]([CH3:25])=[CH2:24]>CO>[NH:12]([C:13]1[CH:18]=[CH:17][C:16]([NH:19][C:22](=[O:21])[C:23]([CH3:25])=[CH2:24])=[CH:15][CH:14]=1)[C:9]1[CH:8]=[CH:7][CH:6]=[CH:11][CH:10]=1
参加物反応条件実験手順後処理出典と根拠反応ノート

参加物

6

反応物 4

HCID 947NitrogenHCID 6658Methyl MethacrylateHCID 7564N-Phenyl-p-phenylenediamineHCID 10942334Sodium Methoxide

生成物 1

HCID 1624682-Propenamide, 2-methyl-N-(4-(phenylamino)phenyl)-収率 80.15%

試薬・触媒・溶媒 1

HCID 887Methanol溶媒

反応条件

温度
70 °C

実験手順

A one liter flask equipped with an agitator was charged with 90 grams of methanol and 30 grams (0.55 mol) of sodium methoxide while under a slow N2 purge. The mixture was stirred until solution was achieved. 450 milliliters of xylene followed by 92 grams (0.5 mol) of p-aminodiphenylamine and 70.8 (0.71 mol) of methylmethacrylate were added to the flask while agitating. The homogeneous solution was then slowly heated and methanol was removed through a packed column. Methanol forms an azeotrope with methylmethacrylate and thus the distillate contained some methylmethacrylate as well as some xylene. Approximately 120 grams of distillate was removed over a period of two hours, during which the column outlet temperature stayed at 62°-63° C. while the flask temperature rose from 90° C. to 138° C. The column outlet temperature then started climbing, indicating the absence of methanol. The flask was then cooled to 70° C. and the sodium salt was filtered through a Buchner funnel. The salt was first washed with xylene to remove the residual amine and then with hexane. The salt was allowed to air dry and then restirred in one liter of cold water. It was then hydrolyzed with 10 percent sulfuric acid to pH of about 6. The product was filtered and air dried yielding 101 grams of N-(4-anilinophenyl) methacrylamide having a melting point of 102°-103° C. The yield was 80.15 percent.

後処理

  1. customA one liter flask equipped with an agitator
  2. custompurge
  3. additionwere added to the flask
  4. stirringwhile agitating
  5. temperatureThe homogeneous solution was then slowly heated
  6. custommethanol was removed through a packed column
  7. customApproximately 120 grams of distillate was removed over a period of two hours, during which the column outlet temperature
  8. customstayed at 62°-63° C. while the flask temperature
  9. customrose from 90° C. to 138° C
  10. filtrationthe sodium salt was filtered through a Buchner funnel
  11. washThe salt was first washed with xylene
  12. customto remove the residual amine
  13. customto air dry
  14. stirringrestirred in one liter of cold water
  15. filtrationThe product was filtered
  16. customair dried

出典と根拠

ORDレコード
ord-63d3aff4ea484c7ba7c55e916019ca0b
出典データセット
uspto-grants-1982_03
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US04322551

反応ノート

このページの内容参加物反応条件実験手順後処理出典と根拠反応ノート