ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

Phosgene → 4-(2-Fluoro-4-isocyanatophenyl)morpholine

HRID 2188340
印刷

反応式

HRID 2188340 の反応式
[F:1][C:2]1[CH:3]=[C:4]([CH:6]=[CH:7][C:8]=1[N:9]1[CH2:14][CH2:13][O:12][CH2:11][CH2:10]1)[NH2:5].[C:15](Cl)(Cl)=[O:16]>C(Cl)Cl.ClC1C=CC(C)=CC=1>[F:1][C:2]1[CH:3]=[C:4]([N:5]=[C:15]=[O:16])[CH:6]=[CH:7][C:8]=1[N:9]1[CH2:14][CH2:13][O:12][CH2:11][CH2:10]1
参加物実験手順後処理出典と根拠反応ノート

参加物

5

反応物 2

HCID 6371PhosgeneHCID 14853303-Fluoro-4-morpholinoaniline

生成物 1

HCID 110095384-(2-Fluoro-4-isocyanatophenyl)morpholine

試薬・触媒・溶媒 2

HCID 6344Dichloromethane溶媒HCID 78104-Chlorotoluene溶媒

実験手順

A mixture of 3-Fluoro-4-morpholinylaniline (PREPARATION 1, 12.01 g, 61.21 mmol) in methylene chloride (100 ml) is added to a mixture of phosgene (1.93 M in toluene, 63.4 ml, 122.4 mmol, 2.00 eq) in p-chlorotoluene (60 ml) over 15 min, a while maintaining the temperature from about −12 to 3°. The material is rinsed in with methylene chloride (30 ml). The mixture is then warmed to 130° under atmospheric pressure with concomitant distillation of methylene chloride, phosgene, toluene and hydrogen chloride gas into a caustic scrubber. The mixture is cooled to 25° and filtered. The precipitate is washed with methylene chloride (3×15 ml). The filtrate is concentrated under reduced pressure. Heptane (200 ml) is added to the concentrated filtrate and the resultant slurry cooled to −32°. The product is collected by filtration with reduced pressure, washed with heptane cooled to −30°, and dried in a nitrogen stream to give the title compound, HPLC (stationary phase is 4.6×250 mm zorbax RX C-8 column; mobile phase is acetonitrile (650 ml), triethylamine (1.85 ml) and acetic acid (1.30 ml) and water of sufficient amount to make 1,000 ml; flow rate=3.0 ml/min; UV detection at 254 nm) RT=1.08 min. Upon derivatizing as N-carbomethoxy-3-fluoro-4-morpholinylaniline by dissolving in methanol; NMR (CDCl3) 3.05, 3.86 and 6.78-6.89 δ; CMR (CDCl3) 50.90, 66.89, 113.11, 119.15, 120.83, 124.67, 127.65, 138.06 and 155.40 δ; MS (EI), m/z (relative intensity) 222 (37) and 164 (100).

後処理

  1. temperaturea while maintaining the temperature from about −12 to 3°
  2. washThe material is rinsed in with methylene chloride (30 ml)
  3. temperatureThe mixture is then warmed to 130° under atmospheric pressure with concomitant distillation of methylene chloride, phosgene, toluene and hydrogen chloride gas into a caustic scrubber
  4. temperatureThe mixture is cooled to 25°
  5. filtrationfiltered
  6. washThe precipitate is washed with methylene chloride (3×15 ml)
  7. concentrationThe filtrate is concentrated under reduced pressure
  8. additionHeptane (200 ml) is added to the concentrated filtrate
  9. temperaturethe resultant slurry cooled to −32°
  10. filtrationThe product is collected by filtration with reduced pressure
  11. washwashed with heptane
  12. temperaturecooled to −30°
  13. customdried in a nitrogen stream

出典と根拠

ORDレコード
ord-93192f4eb86c4a148e20774fea047286
出典データセット
uspto-grants-2002_06
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US06410788B1

反応ノート

このページの内容参加物実験手順後処理出典と根拠反応ノート