ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

Iodine → 2-Iodo-2',4',6'-triisopropyl-3,6-dimethoxybiphenyl

HRID 2266984
印刷

反応式

HRID 2266984 の反応式
[Mg].[CH:2]([C:5]1[CH:10]=[C:9]([CH:11]([CH3:13])[CH3:12])[CH:8]=[C:7]([CH:14]([CH3:16])[CH3:15])[C:6]=1Br)([CH3:4])[CH3:3].BrCCBr.[CH3:22][O:23][C:24]1[CH:29]=[CH:28][C:27]([O:30][CH3:31])=[CH:26][C:25]=1F.[Li]CCCC.[I:38]I>C1COCC1>[I:38][C:25]1[C:24]([O:23][CH3:22])=[CH:29][CH:28]=[C:27]([O:30][CH3:31])[C:26]=1[C:6]1[C:5]([CH:2]([CH3:4])[CH3:3])=[CH:10][C:9]([CH:11]([CH3:13])[CH3:12])=[CH:8][C:7]=1[CH:14]([CH3:16])[CH3:15]
参加物実験手順後処理出典と根拠反応ノート

参加物

8

反応物 6

HCID 807IodineHCID 78391,2-DibromoethaneHCID 1408461-Bromo-2,4,6-triisopropylbenzeneHCID 1450022-Fluoro-1,4-dimethoxybenzeneHCID 5462224MagnesiumHCID 178418339Butyllithium

生成物 1

HCID 57857501
2-Iodo-2',4',6'-triisopropyl-3,6-dimethoxybiphenyl
収率 72%

試薬・触媒・溶媒 1

HCID 8028Tetrahydrofuran溶媒3 回

実験手順

An oven-dried three-neck 500 mL round-bottom flask, which was equipped with a magnetic stir bar and charged with magnesium shavings (2.8 g, 116 mmol), was fitted with a reflux condenser, glass stopper, and rubber septum. The flask was purged with argon and then THF (100 mL) and 2,4,6-triisopropylbromobenzene (24.3 mL, 96 mmol) were added via syringe. The reaction mixture was heated to reflux and 1,2-dibromethane (40 uL) was added via syringe. The reaction was allowed to stir at reflux for 1.5 h and was then cooled to room temperature. A separate oven-dried 2 L round bottom flask, which was equipped with a magnetic stir bar and fitted with a septum, was purged with argon and then THF (500 mL) and 1,4-dimethoxy-2-fluorobenzene (7.49 g, 48 mmol) were added to the flask via syringe. The reaction mixture was cooled to −78° C. and n-BuLi (2.5 M in Hexane, 19.4 mL, 48.5 mmol) was added in a dropwise fashion over a 40 min period. The solution was stirred for 1 h and the Grignard reagent, which was prepared in the first reaction vessel, was added via cannula over a 30 min period and allowed to stir at −78° C. for 1 h. The reaction mixture was warmed to room temperature slowly where it was stirred for an additional 12 h. The mixture was then cooled to 0° C. and a solution of Iodine in THF (1 M, 96 mL, 96 mmol) was added via syringe over a 15 min period and then the dark red solution was warmed to room temperature and stirred for 1 h. The solvent was removed via a rotary evaporator, and the remaining dark brown oil was taken up in Et2O, washed with a saturated solution of sodium sulfite, and washed with brine. The organic layer was then dried over MgSO4, filtered, and the solvent was removed via rotary evaporator to give a yellow solid. The crude material was triturated with hexanes and filtered to give the desired product as an off-white solid (16.199 g, 72%, mp 189-191° C.). 1H NMR (300 MHz, CDCl3) δ: 7.07 (s, 2H), 6.90 (d, J=9.0 Hz, 1H), 6.81 (d, J=9.0 Hz, 1H), 3.90 (s, 3H), 3.67 (s, 3H), 2.98 (septet, J=7.0 Hz, 1H), 2.39 (septet, J=7.0 Hz, 2H), 1.33 (d, J=7.0 Hz, 6H), 1.20 (d, 7.0 Hz, 6H), 1.02 (d, J=7.0 Hz, 6H) ppm. 13C NMR (75 MHz, CDCl3) δ: 152.7, 152.5, 148.4, 145.9, 136.4, 136.1, 121.0, 110.3, 109.4, 96.6, 57.0, 55.8, 34.3, 31.1, 24.8, 24.3, 23.9 ppm. IR (neat, cm−1): 2957, 2865, 1567, 1460, 1428, 1257, 1032, 755. Anal. Calcd. for C23H31IO2: C, 59.23; H, 6.70. Found: C, 59.23; H, 6.72.

後処理

  1. customAn oven-dried three-neck 500 mL round-bottom flask, which was equipped with a magnetic stir bar
  2. customwas fitted with a reflux condenser
  3. customThe flask was purged with argon
  4. temperatureThe reaction mixture was heated
  5. temperatureto reflux
  6. temperatureat reflux for 1.5 h
  7. customA separate oven-dried 2 L round bottom flask
  8. customwhich was equipped with a magnetic stir bar
  9. customfitted with a septum
  10. customwas purged with argon
  11. temperatureThe reaction mixture was cooled to −78° C.
  12. stirringThe solution was stirred for 1 h
  13. additionwas added via cannula over a 30 min period
  14. stirringto stir at −78° C. for 1 h
  15. temperatureThe reaction mixture was warmed to room temperature slowly where it
  16. stirringwas stirred for an additional 12 h
  17. temperatureThe mixture was then cooled to 0° C.
  18. temperaturethe dark red solution was warmed to room temperature
  19. stirringstirred for 1 h
  20. customThe solvent was removed via a rotary evaporator
  21. washwashed with a saturated solution of sodium sulfite
  22. washwashed with brine
  23. dry with materialThe organic layer was then dried over MgSO4
  24. filtrationfiltered
  25. customthe solvent was removed via rotary evaporator
  26. customto give a yellow solid
  27. customThe crude material was triturated with hexanes
  28. filtrationfiltered

出典と根拠

ORDレコード
ord-6034289d25e54134844f571bd2540b85
出典データセット
uspto-grants-2010_12
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US07858784B2

反応ノート

このページの内容参加物実験手順後処理出典と根拠反応ノート