[Mg].[CH:2]([C:5]1[CH:10]=[C:9]([CH:11]([CH3:13])[CH3:12])[CH:8]=[C:7]([CH:14]([CH3:16])[CH3:15])[C:6]=1Br)([CH3:4])[CH3:3].BrCCBr.[CH3:22][O:23][C:24]1[CH:25]=[C:26](F)[CH:27]=[C:28]([O:30][CH3:31])[CH:29]=1.[Li]CCCC.[I:38]I>C1COCC1>[I:38][C:25]1[C:24]([O:23][CH3:22])=[CH:29][C:28]([O:30][CH3:31])=[CH:27][C:26]=1[C:6]1[C:5]([CH:2]([CH3:4])[CH3:3])=[CH:10][C:9]([CH:11]([CH3:13])[CH3:12])=[CH:8][C:7]=1[CH:14]([CH3:16])[CH3:15]An oven-dried three-neck 500 mL round bottom flask, which was equipped with a magnetic stir bar and charged with magnesium shavings (2.8 g, 116 mmol), was fitted with a reflux condenser, glass stopper, and rubber septum. The flask was purged with argon and then THF (45 mL) and 2,4,6-triisopropylbromobenzene (11.4 mL, 45 mmol) were added via syringe. The reaction mixture was heated to reflux and 1,2-dibromethane (40 uL) was added via syringe. The reaction was allowed to stir at reflux for 1.5 h and was then cooled to room temperature. A separate oven-dried 2 L round bottom flask, which was equipped with a magnetic stir bar and fitted with a septum, was purged with argon and then THF (200 mL) and 3,5-dimethoxyfluorobenzene (3 mL, 22.5 mmol) were added to the flask via syringe. The reaction mixture was cooled to −78° C. and n-BuLi (2.5 M in Hexane, 9.2 mL, 23 mmol) was added in a dropwise fashion over a 40 min period. The solution was stirred for 1 h and the Grignard reagent, which was prepared in the first reaction vessel, was added via cannula over a 30 min period and allowed to stir at −78° C. for 1 h. The reaction mixture was warmed to room temperature slowly where it was stirred for an additional 12 h. The mixture was then cooled to 0° C. and a solution of Iodine in THF (1 M, 50 mL, 50 mmol) was added via syringe over a 15 min period and then the dark red solution was warmed to room temperature and stirred for 1 h. The solvent was removed via a rotary evaporator, and the remaining dark brown oil was taken up in Et2O, washed with a saturated solution of sodium sulfite, and washed with brine. The organic layer was then dried over MgSO4, filtered, and the solvent was removed via rotary evaporator to give a yellow solid. The crude material was triturated with hexanes and filtered to give the desired product as an off-white solid (5.059 g, 48%).