ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

2-Butyl-5-nitro-1H-isoindole-1,3(2H)-dione → 4-amino-N-butylphthalimide

HRID 2288129
印刷

反応式

HRID 2288129 の反応式
[N+:1]([C:4]1[CH:5]=[C:6]2[C:11](=[O:12])[N:10]([CH2:13][CH2:14][CH2:15][CH3:16])[C:8](=[O:9])[C:7]2=[CH:17][CH:18]=1)([O-])=O.[H][H]>N.O[V](=O)=O.[O-2].[O-2].[Ti+4].[Pd].O>[NH2:1][C:4]1[CH:5]=[C:6]2[C:11](=[O:12])[N:10]([CH2:13][CH2:14][CH2:15][CH3:16])[C:8](=[O:9])[C:7]2=[CH:17][CH:18]=1
参加物反応条件実験手順後処理出典と根拠反応ノート

参加物

7

反応物 2

HCID 932972-Butyl-5-nitro-1H-isoindole-1,3(2H)-dione2 回HCID 178418361HCID 178418361、化合物2 回

生成物 1

HCID 3289774-amino-N-butylphthalimide収率 80%

試薬・触媒・溶媒 4

HCID 23938Palladium触媒HCID 62684Vanadic acid, ammonium salt触媒
HCID 162651
Titanium oxide (Ti3O)
触媒
HCID 962Water溶媒

反応条件

温度
65 °C

実験手順

0.001 g of ammonium vanadate and 0.5 g of titanium dioxide extrudate containing 1% by weight of metallic palladium and having a particle size of 3 mm (from Johnson Matthey) are added to a suspension consisting of 50 ml of water and 2.5 g of 4-nitro-N-butylphthalimide. After displacing the air with nitrogen, the latter is replaced by hydrogen at atmospheric pressure and the suspension is stirred at 65° C. for 68 hours. During this time, 97% of the theoretical amount of hydrogen, based on the 4-nitro-N-butylphthalimide, is absorbed. The resulting suspension is then sieved through a sieve having a mesh width of 1 mm. The material remaining on the sieve is washed with 50 ml of water and the combined aqueous phases are then filtered through a paper filter and washed with 250 ml of water. Drying at 80° C. under reduced pressure (125 mbar) gives 1.7 g (80%) of 4-amino-N-butylphthalimide.

後処理

  1. additionare added to a suspension
  2. customis absorbed
  3. filtrationThe resulting suspension is then sieved through a sieve
  4. washis washed with 50 ml of water
  5. filtrationthe combined aqueous phases are then filtered through a paper
  6. filtrationfilter
  7. washwashed with 250 ml of water
  8. customDrying at 80° C. under reduced pressure (125 mbar)

出典と根拠

ORDレコード
ord-33c45314607a4e31a3da98e6d2497b13
出典データセット
uspto-grants-2000_07
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US06087480

反応ノート

このページの内容参加物反応条件実験手順後処理出典と根拠反応ノート