ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

Water → (4-Methoxybenzylidene)-(4-{[(4-methoxybenzylidene)amino]methyl}-phenyl)amine

HRID 229889
印刷

反応式

HRID 229889 の反応式
[C:1]1([CH3:7])[CH:6]=[CH:5][CH:4]=[CH:3][CH:2]=1.[NH2:8][C:9]1[CH:16]=[CH:15][C:12]([CH2:13][NH2:14])=[CH:11][CH:10]=1.[CH3:17][O:18][C:19]1[CH:20]=[CH:21][C:22]([CH:25]=O)=[CH:23][CH:24]=1.O.[C:28](OCC)(=[O:30])C>CCCCCCC.CCN(CC)CC.C(OCC)(=O)C.CCCCCCC>[CH3:28][O:30][C:4]1[CH:5]=[CH:6][C:1]([CH:7]=[N:8][C:9]2[CH:16]=[CH:15][C:12]([CH2:13][N:14]=[CH:25][C:22]3[CH:23]=[CH:24][C:19]([O:18][CH3:17])=[CH:20][CH:21]=3)=[CH:11][CH:10]=2)=[CH:2][CH:3]=1
参加物反応条件実験手順後処理出典と根拠反応ノート

参加物

9

反応物 5

HCID 962Water2 回HCID 1140TolueneHCID 8857Ethyl AcetateHCID 312444-MethoxybenzaldehydeHCID 4278144-Aminobenzylamine2 回

生成物 1

HCID 57758902(4-Methoxybenzylidene)-(4-{[(4-methoxybenzylidene)amino]methyl}-phenyl)amine

試薬・触媒・溶媒 3

HCID 8471Triethylamine溶媒
HCID 8900Heptane溶媒
HCID 21899848Ethylacetate heptane溶媒

反応条件

温度
140 °C

実験手順

430 ml of toluene and 40 ml (349 mmol) of 99% pure 4-aminobenzylamine are introduced into a four-neck flask with mechanical paddle stirrer, water trap and reflux condenser. A two-phase mixture is obtained owing to the low solubility of the amine. 96 ml (775 mmol) of 98% pure anisaldehyde are added, and the mixture is heated with an oil bath heated to 140° C. In the heating-up phase, the reaction mixture starts to boil at around 80° C., and cloudy water/toluene azeotrope distills into the water trap. After about 30 min, the maximum internal temperature is 114° C., and only clear toluene now distills over. 12.5 ml of water (corresponding to about 100% of theory of the two equivalents of water) separate out. A TLC check (plate deactivated by previously standing in NEt3(triethylamine) vapor-saturated tank, ethyl acetate/n-heptane 1:1 plus 1% NEt3) indicates complete conversion of the 4-aminobenzylamine. The mixture is actively cooled to room temperature. A mixture of 800 ml of n-heptane and 200 ml of ethyl acetate is then run slowly in, during which, after addition of only about 200 ml, a pale yellow precipitate separates out spontaneously. The mixture is stirred for 1 h, and the precipitate is filtered off with suction and dried under HV. Yield: 105.6 g.

後処理

  1. temperaturereflux condenser
  2. customA two-phase mixture is obtained
  3. temperaturethe mixture is heated with an oil bath
  4. customto boil at around 80° C.
  5. distillationcloudy water/toluene azeotrope distills into the water trap
  6. customis 114° C.
  7. distillationonly clear toluene now distills over
  8. temperatureThe mixture is actively cooled to room temperature
  9. additionafter addition of only about 200 ml
  10. filtrationthe precipitate is filtered off with suction
  11. customdried under HV

出典と根拠

ORDレコード
ord-75a2a20301c1474bb1593d002fcf2723
出典データセット
uspto-grants-2009_07
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US07563888B2

反応ノート

このページの内容参加物反応条件実験手順後処理出典と根拠反応ノート