ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

Hexane → 2,6-Bis(tri-n-butylstannyl)-benzo[1,2-b:4,5-b']dithiophene

HRID 2392484
印刷

反応式

HRID 2392484 の反応式
[S:1]1[CH:5]=[CH:4][C:3]2=[CH:6][C:7]3[S:8][CH:9]=[CH:10][C:11]=3[CH:12]=[C:2]12.[CH2:13]([Li])[CH2:14][CH2:15][CH3:16].[CH2:18]([Sn:22](Cl)([CH2:27][CH2:28][CH2:29][CH3:30])[CH2:23][CH2:24][CH2:25][CH3:26])[CH2:19][CH2:20][CH3:21].CC[CH2:34][CH2:35][CH2:36][CH3:37]>C1COCC1>[CH2:13]([Sn:22]([CH2:34][CH2:35][CH2:36][CH3:37])([CH2:18][CH2:19][CH2:20][CH3:21])[C:5]1[S:1][C:2]2=[CH:12][C:11]3[CH:10]=[C:9]([Sn:22]([CH2:27][CH2:28][CH2:29][CH3:30])([CH2:23][CH2:24][CH2:25][CH3:26])[CH2:18][CH2:19][CH2:20][CH3:21])[S:8][C:7]=3[CH:6]=[C:3]2[CH:4]=1)[CH2:14][CH2:15][CH3:16]
参加物反応条件実験手順後処理出典と根拠反応ノート

参加物

6

反応物 4

HCID 8058HexaneHCID 15096Tributyltin ChlorideHCID 11106168Benzo(1,2-b:4,5-b')dithiopheneHCID 178418339Butyllithium

生成物 1

HCID 585455822,6-Bis(tri-n-butylstannyl)-benzo[1,2-b:4,5-b']dithiophene収率 42%

試薬・触媒・溶媒 1

HCID 8028
Tetrahydrofuran
溶媒

反応条件

温度
-78 °C

実験手順

To a stirred solution of benzo[1,2-b:4,5-b′]dithiophene (820 mg, 4.3 mmol) in THF (100 mL) under argon at −78° C. was added a solution of n-butyllithium (2.5 M, 3.44 mL, 8.6 mmol). The solution was stirred at −78° C. for 30 minutes and then warmed to −20° C. for 30 minutes. Tri-n-butyltin chloride (2.34 mL, 8.6 mmol) was added and the reaction mixture was stirred at −20° C. for 30 minutes and then allowed to warm to room temperature. After 16 hours, hexane was added and the reaction was successively washed with water and brine, dried (MgSO4), concentrated and purified by flash chromatography (100% hexanes). 2,6-bis(tri-n-butylstannyl)-benzo[1,2-b :4,5-b′]dithiophene (1.4 g, 42%) was isolated along with product contaminated with the monostannylated benzodithiophene. 1H-NMR: 400 MHz, (CDCl3) δ: 8.27 (s, 2H), 7.38 (s, 2H), 1.65-1.57 (m, 12H), 1.41-1.32 (m, 12H), 1.26-1.11 (m, 12H), 0.91 (t, J=7.3 Hz, 18H) ppm. Fully protected 2-[5-(6-{2-[pyrrolidin-2-yl]-3H-imidazol-4-yl}-benzo[1,2-b:4,5-b′]dithiophene-2-yl)-1H-imidazol-2-yl]-pyrrolidine: Pd(PPh3)4 (61 mg, 0.053 mmol) was added to a degassed solution of 2,6-bis(tri-n-butylstannyl)-benzo[1,2-b:4,5-b′]dithiophene (202 mg, 0.26 mmol) and 2-[4-Bromo-1-(2-trimethylsilanyl-ethoxymethyl)-1H-imidazol-2-yl]-pyrrolidine-1-carboxylic acid tert-butyl ester (260 mg, 0.58 mmol) in toluene (4 mL). The reaction was refluxed for 24 hours, then cooled to room temperature and filtered through CELITE and a palladium scavenging column (Stratospheres™ PL-Guanidine MP SPE+, Part #: PL3514-CM89). The solids were rinsed twice with toluene. The filtrate was concentrated and the crude product purified by flash chromatography to yield the desired, fully protected product (100 mg, 41%). LCMS-ESI+: calculated for C46H68N6O6S2Si2: 920.42; observed [M+1]+ : 921.45. (1-{2-[5-(6-{2-[1-(2-Methoxycarbonylamino-3-methyl-butyryl)-pyrrolidin-2-yl]-3H-imidazol-4-yl}-benzo[1,2-b:4,5-b]dithiophene-2-yl)-1H-imidazol-2-yl]-pyrrolidine-1-carbonyl}-2-methyl-propyl)-carbamic acid methyl ester: A solution of fully protected 2-[5-(6-{2-[pyrrolidin-2-yl]-3H-imidazol-4-yl}-benzo[1,2-b:4,5-b′]dithiophene-2-yl)-1H-imidazol-2-yl]-pyrrolidine (100 mg, 0.11 mmol), ethanol (4 mL) and concentrated HCl (1 mL) was heated to 60° C. for 16 hours. The reaction was concentrated and the crude material dissolved in DCM (10 mL). This solution was concentrated to yield crude 2454642-[pyrrolidin-2-yl]-3H-imidazol-4-yl]-benzo[1,2-b:4,5-bldithiophene-2-yl)-1H-imidazol-2-yl]-pyrrolidine tetrahydrochloride. To this material was added a solution of 2-methoxycarbonylamino-3-methylbutyric acid (38 mg, 0.22 mmol) and HATU (83 mg, 0.22 mmol) in DMF (1.5 mL). To the resulting solution was added diisopropylethylamine (190 μL, 1.1 mmol). After stirring for 2 hours at room temperature, the reaction was concentrated and purified twice by preparative reverse phase HPLC (Gemini, 10 to 45% ACN/H2O+0.1% HCO2H). The product fractions were passed through a freebasing column (STRATOSPHERES™ PL-HCO3 MP SPE, Part #: PL3540-C603) and lyophilized to give (1-{2-[5-(6-{2-[1-(2-methoxycarbonylamino-3-methyl-butyryl)-pyrrolidin-2-yl]-3H-imidazol-4-yl]-benzo[1,2-b:4,5-bldithiophene-2-yl)-1H-imidazol-2-yl]-pyrrolidine-1-carbonyl}-2-methyl-propyl)-carbamic acid methyl ester (29 mg, 34%). LCMS-ESI+: calculated for C38H46N8O6S2: 774.95; observed [M+1]+ : 775.96. 1H-NMR: 400 MHz, (CD3OD) δ: 8.16-8.11 (m, 2H), 7.49-7.47 (m, 2H), 7.38-7.29 (m, 2H), 5.18-5.15 (m, 2H), 4.24 (d, J=7.4 Hz, 2H), 4.04-3.96 (m, 2H), 3.91-3.86 (m, 2H), 3.66 (br s, 6H), 2.38-2.17 (m, 6H), 2.11-1.98 (m, 4H), 1.00-0.89 (m, 12H) ppm.

後処理

  1. temperaturewarmed to −20° C. for 30 minutes
  2. stirringthe reaction mixture was stirred at −20° C. for 30 minutes
  3. temperatureto warm to room temperature
  4. waitAfter 16 hours
  5. washthe reaction was successively washed with water and brine
  6. dry with materialdried (MgSO4)
  7. concentrationconcentrated
  8. custompurified by flash chromatography (100% hexanes)

出典と根拠

ORDレコード
ord-7f30fc21e046464786f22b90820c4508
出典データセット
uspto-grants-2012_09
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US08273341B2

反応ノート

このページの内容参加物反応条件実験手順後処理出典と根拠反応ノート