ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

Iodine → 2',3'-Difluoro-4'-iodo-4-pentylbiphenyl

HRID 241478
印刷

反応式

HRID 241478 の反応式
[F:1][C:2]1[C:7]([F:8])=[CH:6][CH:5]=[CH:4][C:3]=1[C:9]1[CH:14]=[CH:13][C:12]([CH2:15][CH2:16][CH2:17][CH2:18][CH3:19])=[CH:11][CH:10]=1.[I:20]I>O1CCCC1>[F:1][C:2]1[C:7]([F:8])=[C:6]([I:20])[CH:5]=[CH:4][C:3]=1[C:9]1[CH:14]=[CH:13][C:12]([CH2:15][CH2:16][CH2:17][CH2:18][CH3:19])=[CH:11][CH:10]=1
参加物反応条件実験手順後処理出典と根拠反応ノート

参加物

4

反応物 2

HCID 807Iodine2 回HCID 105874252,3-Difluoro-4'-pentyl-1,1'-biphenyl

生成物 1

HCID 670910372',3'-Difluoro-4'-iodo-4-pentylbiphenyl

試薬・触媒・溶媒 1

HCID 8028Tetrahydrofuran溶媒2 回

反応条件

温度
-78 °C

実験手順

2′,3′-Difluoro-4-pentylbiphenyl (612 g, 0.243 mol), and dry tetrahydrofurane (400 ml) were placed in 1 L flask equipped with mechanical stirrer, nitrogen inlet and outlet, pressure-equilibrated dropping funnel and thermometer. The reaction flask was flushed with nitrogen and minor flow was held during whole reaction time. The mixture was cooled down to −78° C. on the dry ice/acetone bath and then 2.5 mol/dm3 of n-butyllithium solution in hexane (100 ml 025 mol) was added dropwise, keeping the reaction temperature below −70° C. After addition of all n-butyllithium the mixture was stirred for additional 2 hours at −78° C. Next iodine solution in tetrahydrofurane (63.5 g, 0.25 mol) was added dropwise maintaining the temperature below −70° C. After addition of the iodine solution the cooling bath was removed and the mixture was stirred to reach the room temperature. Organic solvents were evaporated and the thick oily residue was diluted with hexane and treated with water solution of sodium sulfite to remove the remaining iodine. Phases were separated and hexane was evaporated. The residue was distilled under reduced pressure 1 mmHg collecting the fraction boiling at 174-175° C. The colourles liquid product 71 g was obtained with 78% of theor. yield.

後処理

  1. customequipped with mechanical stirrer, nitrogen inlet and outlet
  2. customThe reaction flask was flushed with nitrogen and minor flow
  3. addition2.5 mol/dm3 of n-butyllithium solution in hexane (100 ml 025 mol) was added dropwise
  4. customthe reaction temperature below −70° C
  5. additionAfter addition of all n-butyllithium the mixture
  6. temperaturemaintaining the temperature below −70° C
  7. customwas removed
  8. stirringthe mixture was stirred
  9. customthe room temperature
  10. customOrganic solvents were evaporated
  11. additionthe thick oily residue was diluted with hexane
  12. additiontreated with water solution of sodium sulfite
  13. customto remove the remaining iodine
  14. customPhases were separated
  15. customhexane was evaporated
  16. distillationThe residue was distilled under reduced pressure 1 mmHg
  17. customcollecting the fraction boiling at 174-175° C

出典と根拠

ORDレコード
ord-838f4ffb14b545879076330363eab001
出典データセット
uspto-grants-2014_02
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US08652353B2

反応ノート

このページの内容参加物反応条件実験手順後処理出典と根拠反応ノート