[Mn]([O-])(=O)(=O)=O.[K+].[Cl:7][C:8]1[NH:9][C:10]2[C:15]([CH2:16][C:17]=1[CH:18]=[O:19])=[CH:14][C:13]([F:20])=[C:12]([Cl:21])[CH:11]=2.S(S([O-])=O)([O-])=[O:23].[Na+].[Na+]>O.[OH-].[K+]>[Cl:7][C:8]1[C:17]([C:18]([OH:23])=[O:19])=[CH:16][C:15]2[C:10](=[CH:11][C:12]([Cl:21])=[C:13]([F:20])[CH:14]=2)[N:9]=1A solution of potassium permanganate (89.3 g) in water (1.4 liters) is added in the course of 1 hour to a stirred suspension, cooled to 10° C., of 2,7-dichloro-6-fluoro-3-formyl-1,4-dihydroquinoline (69.5 g) in 2 N aqueous potassium hydroxide (282 cc) and water (282 cc) while the temperature is maintained at between 10° and 14° C. The temperature is allowed to rise to approximately 20° C. and the mixture is stirred for a further 30 minutes at this temperature. Sodium dithionite (26 g) is added and the mixture is stirred for 10 minutes at a temperature in the region of 20° C., filtered through diatomaceous silica for filtration and washed with water (2×250 cc). The filtrate and the aqueous washing phases are combined and treated with 35% strength aqueous hydrochloric acid solution (90 cc). The precipitate formed is extracted with ethyl acetate (4×500 cc). The combined organic extracts are washed with water (3×500 cc), dried over magnesium sulphate, filtered and concentrated under reduced pressure (20 kPa) at 50° C. The residue is taken up with ethyl ether (350 cc), drained and washed with ethyl ether (2×200 cc). 2,7-Dichloro-6-fluoro-3-quinolinecarboxylic acid (45 g) is obtained in the form of a beige solid, m.p. 230° C., which is used without further purification for the subsequent steps.