Br[C:2]1[CH:3]=[C:4]([Cl:10])[CH:5]=[CH:6][C:7]=1[O:8][CH3:9].C([Li])CCC.[B:16](OC(C)C)([O:21]C(C)C)[O:17]C(C)C>O1CCCC1>[Cl:10][C:4]1[CH:5]=[CH:6][C:7]([O:8][CH3:9])=[C:2]([B:16]([OH:21])[OH:17])[CH:3]=1A stirred solution of 5.8 grams (0.026 mole) of 3-bromo-4-methoxychlorobenzene in 150 mL of tetrahydrofuran was cooled to -80° C., and 11.5 mL of n-butyllithium in hexanes (2.5 Molar-0.029 mole) was added dropwise during a 15 minute period, while maintaining the reaction mixture temperature at about -70° C. The initial reaction was very exothermic, which required cooling the reaction mixture to about -100° C. Upon completion of the addition, the reaction mixture was stirred at -80° C. for 15 minutes. After this time, 17.5 mL (0.076 mole) triisopropyl borate was added during a 1 minute period. The reaction mixture was then allowed to warm slowly to ambient temperature during a 3 hour period, where it was stirred for an additional 1 hour. After this time, the reaction mixture was concentrated under reduced pressure to a volume of about 50 mL. The concentrate was then poured into 500 mL of ice-water. The mixture was then made acidic with about 26 mL of aqueous 2N hydrochloric acid. The mixture was then filtered to collect a solid, which was dried, yielding 3.9 grams of 5-chloro-2-methoxyphenylboronic acid. The NMR spectrum was consistent with the proposed structure.