ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

Styrene → Isobutylene styrene

HRID 394818
印刷

反応式

HRID 394818 の反応式
[CH2:1]=[CH:2][C:3]1[CH:8]=[CH:7][CH:6]=[CH:5][CH:4]=1>O>[CH3:4][C:3](=[CH2:2])[CH3:8].[CH2:1]=[CH:2][C:3]1[CH:8]=[CH:7][CH:6]=[CH:5][CH:4]=1
参加物実験手順後処理出典と根拠反応ノート

参加物

3

反応物 1

HCID 7501Styrene

生成物 1

HCID 44154101Isobutylene styrene

試薬・触媒・溶媒 1

HCID 962Water溶媒

実験手順

The polymerizable monomer component and polymerization initiator were charged into the storage tank 21, the catalyst was charged into the storage 22, and the electron donor was charged into the storage tank 33, in the respective proportions shown in Table 12. The reaction solution obtained at the outlet of the tubular reactor 26 in the same manner as in Example 1 was once allowed to reside in the cushioning vessel 30, then in the stirring vessel reactor 35, the second polymerizable monomer component styrene was added in an amount of 290 moles per mole of p-DCC and the reaction was carried out batchwise at −65° C. for 3 hours. The reaction solution was admixed with water for catalyst deactivation and washed with water and then the solvent was removed to give an isobutylene-styrene block copolymer. The molecular weight distribution peak (Mp) and distribution (Mw/Mn) of the polymer were determined by the GPC method. The analytical values for the polymer at the outlet of the reactor 26 (150 minutes after the start of the feeding) and the analytical values for the polymer at the outlet of the reactor 35 were as shown in Table 13. The conversion rate of the monomer component on the occasion of feeding the reaction solution from the reactor 25 to the reactor 26 was 65% by weight.

後処理

  1. customThe polymerizable monomer component and polymerization initiator
  2. additionwere charged into the storage tank 21
  3. additionthe catalyst was charged into the storage 22
  4. additionthe electron donor was charged into the storage tank 33, in the respective proportions
  5. customThe reaction solution obtained at the outlet of the tubular reactor 26 in the same manner as in Example 1
  6. washwashed with water
  7. customthe solvent was removed

出典と根拠

ORDレコード
ord-6eb0782a42ab40068f542e63b863cb32
出典データセット
uspto-grants-2003_08
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US06602965B1

反応ノート

このページの内容参加物実験手順後処理出典と根拠反応ノート