ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

Dibutyl maleate → Gamma-Butyrolactone

HRID 437735
印刷

反応式

HRID 437735 の反応式
[C:1]([O:12][CH2:13][CH2:14][CH2:15]C)(=[O:11])/[CH:2]=[CH:3]\[C:4](OCCCC)=[O:5].[H][H]>[Cr]([O-])([O-])=O.[Cu+2].O>[CH2:1]([OH:11])[CH2:2][CH2:3][CH2:4][OH:5].[C:1]1(=[O:11])[O:12][CH2:13][CH2:14][CH2:15]1
参加物反応条件実験手順後処理出典と根拠反応ノート

参加物

6

反応物 2

HCID 5271569Dibutyl maleateHCID 178418361HCID 178418361、化合物3 回

生成物 2

HCID 7302Gamma-ButyrolactoneHCID 80641,4-Butanediol

試薬・触媒・溶媒 2

HCID 178505374HCID 178505374、化合物触媒HCID 962Water溶媒

反応条件

温度
250 °C

実験手順

Into a 1 liter magnedrive stirred autoclave was placed 200 g. of dibutyl maleate (reagent grade, Matheson Coleman and Bell) and 30 g. of copper chromite hydrogenation catalyst (Calsicat PC 108-80, Mallinckrodt Chemical Works). The autoclave was charged and pressured to 2,900 psig with hydrogen. Heat was then applied and the temperature was slowly brought to approximately 100° C. at which point an exothermic reaction ensued at a temperature increase to 250° C. Cooling water was passed through the internal coils of the autoclave to control the temperature and not to permit it to exceed about 250° C. After about 5 to 10 minutes the internal temperature had returned to approximately 120° C. and the contents of the autoclave were again heated to a temperature of 200° C. and maintained at this temperature and a hydrogen partial pressure of 2,900 psig for a period of 2.5 hours at which time the reaction appeared to be complete. The contents of the autoclave were then cooled and the hydrogen partial pressure was vented to the atmosphere. The catalyst was separated from the liquid autoclave contents by filtration and the filter was washed with n-butanol. Distillation of the filtrate yielded 1,4-butanediol containing a trace of γ-butyrolactone. Analysis of the filtrate by gas-liquid partition chromatographic techniques indicated that 99% of the dibutyl maleate had been converted to products and that the selectivity to 1,4-butanediol was 90%.

後処理

  1. additionThe autoclave was charged
  2. temperatureHeat
  3. customwas slowly brought to approximately 100° C. at which point
  4. customan exothermic reaction
  5. customto exceed about 250° C
  6. temperaturethe contents of the autoclave were again heated to a temperature of 200° C.
  7. temperaturemaintained at this temperature
  8. temperatureThe contents of the autoclave were then cooled
  9. customThe catalyst was separated from the liquid autoclave contents by filtration
  10. washthe filter was washed with n-butanol
  11. distillationDistillation of the filtrate

出典と根拠

ORDレコード
ord-91e2745a9fa94781bdd1439468befe17
出典データセット
uspto-grants-1977_06
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US04032458

反応ノート

このページの内容参加物反応条件実験手順後処理出典と根拠反応ノート