ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

Imidazole → 1H-Imidazole, 1-(1,2,2-trifluoroethenyl)-

HRID 475685
印刷

反応式

HRID 475685 の反応式
[K].N1C=CN=C1.FC(F)=C(F)F.FC(F)(F)C(OCC)=O.[F:22][C:23]([N:28]1[CH:32]=[CH:31][N:30]=[CH:29]1)(F)[CH:24]([F:26])[F:25]>O1CCCC1>[F:22][C:23]([N:28]1[CH:32]=[CH:31][N:30]=[CH:29]1)=[C:24]([F:26])[F:25]
参加物反応条件実験手順後処理出典と根拠反応ノート

参加物

7

反応物 5

HCID 795Imidazole2 回HCID 8301Tetrafluoroethylene4 回HCID 9794Ethyl trifluoroacetateHCID 5462222PotassiumHCID 132688751-(1,1,2,2-Tetrafluoroethyl)-1H-imidazole

生成物 1

HCID 674939581H-Imidazole, 1-(1,2,2-trifluoroethenyl)-収率 55%

試薬・触媒・溶媒 1

HCID 8028Tetrahydrofuran溶媒2 回

反応条件

温度
-78 °C

実験手順

Into a 50 ml autoclave were poured 0.20 g (5 mmol) of metallic potassium and tetrahydrofuran (10 ml), and the inside of the autoclave was cooled to −78° C., and evacuation and replacement by nitrogen were carried out three times. Then thereto was added a solution obtained by dissolving 1.36 g (20 mmol) of imidazole in tetrahydrofuran (10 ml) at 10° C. over 30 minutes under pressurized nitrogen atmosphere. Thereafter tetrafluoroethylene (TFE) was introduced until the inside pressure of the system reached 0.1 MPa·G. Then the temperature of the reaction system was increased to 100° C., and TFE was further introduced to maintain the inside pressure of the reaction system at 0.3 to 0.5 MPa·G. Supply of TFE was stopped when the amount of TFE reached 1.1 equivalents (2.2 g=22 mmol) to imidazole, and stirring was continued at 100° C. Eight hours after starting of the stirring, the inside of the reaction system was brought to room temperature, followed by evacuation to terminate the reaction. To this crude reaction product was added 1.42 g (10 mmol) of ethyl trifluoroacetate, and it was confirmed by a 19F-NMR analysis based on ethyl trifluoroacetate that 1-(1,1,2,2-tetrafluoroethyl)imidazole had been produced at yield of 55% and 1-(1,2,2-trifluoroethenyl)imidazole had been produced at yield of 23%. Also according to gas chromatography, it was confirmed that 9% of imidazole remained.

後処理

  1. additionThen thereto was added a solution
  2. customobtained
  3. temperatureThen the temperature of the reaction system was increased to 100° C.
  4. temperatureto maintain the inside pressure of the reaction system at 0.3 to 0.5 MPa·G
  5. customwas continued at 100° C
  6. customEight hours
  7. customwas brought to room temperature
  8. customto terminate
  9. customthe reaction
  10. customTo this crude reaction product

出典と根拠

ORDレコード
ord-b4fed180c3a64d7dbd7faadd8de7b06c
出典データセット
uspto-grants-2014_01
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US08637601B2

反応ノート

このページの内容参加物反応条件実験手順後処理出典と根拠反応ノート