ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

Sulfuric Acid → Zirconium hydroxide (Zr(OH)4), (T-4)-

HRID 718479
印刷

反応式

HRID 718479 の反応式
[Si:1]([O-])([O-])([O-])[O-:2].[Na+].[Na+].[Na+].[Na+].S(=O)(=O)(O)[OH:11].[O:15](Cl)Cl.[Zr:18].[OH-:19].[Na+].[O:21]=[Al-:22]=O.[Na+]>[O-2].[Ti+4].[O-2].O>[OH-:2].[Si+4:1].[OH-:11].[OH-:15].[OH-:21].[OH-:19].[Zr+4:18].[OH-:2].[OH-:2].[OH-:2].[OH-:2].[Al+3:22].[OH-:2].[OH-:2]
参加物反応条件実験手順後処理出典と根拠反応ノート

参加物

10

反応物 5

HCID 1118Sulfuric Acid2 回HCID 14766Sodium aluminateHCID 14798Sodium HydroxideHCID 26051Sodium orthosilicateHCID 71304769Chloro hypochlorite;zirconium

生成物 3

HCID 84465Zirconium hydroxide (Zr(OH)4), (T-4)-
HCID 10176082
Aluminum Hydroxide
HCID 23617461Silicon(4+) tetrahydroxide

試薬・触媒・溶媒 2

HCID 162651Titanium oxide (Ti3O)触媒HCID 962Water溶媒

反応条件

温度
90 °C

実験手順

Fine titanium oxide particle (Sakai Chemical Industry Co., Ltd., STR-100N) was added to water, to prepare 150 g/L aqueous slurry of TiO2. This slurry (5.0 L) was heated to 90° C. under stirring. While maintaining this temperature, a 150 g/L aqueous solution of sodium silicate, which corresponded to 6% by mass (in terms of SiO2) of TiO2, was added to the slurry. Then, 30% sulfuric acid was added thereto over 180 minutes such that the pH of the slurry should be 9. The resultant slurry was aged for 60 minutes. Next, under stirring, the temperature of the slurry was regulated so as to be 45° C. While the pH of the slurry was maintained to 8.5, a 100 g/L aqueous solution of zirconium oxychloride, which corresponded to 3.0% by mass (in terms of ZrO2) of TiO2, and 30% aqueous sodium hydroxide were added to the slurry as a single portion over 90 minutes. The resultant slurry was aged for 30 minutes. Then, under stirring, while the pH of the slurry was maintained to 8.5, a 250 g/L aqueous solution of sodium aluminate, which corresponded to 4.5% by mass (in terms of Al2O3) of TiO2, and 30% sulfuric acid were added to the slurry as a single portion over 120 minutes. The resultant slurry was aged for 30 minutes. Thus, on the surface of TiO2, coating layers of silicon hydroxide, zirconium hydroxide, and aluminum hydroxide were formed in the order as set forth.

後処理

  1. customto prepare 150 g/L aqueous slurry of TiO2
  2. temperatureWhile maintaining this temperature
  3. additionwas added to the slurry
  4. waitThe resultant slurry was aged for 60 minutes
  5. stirringNext, under stirring
  6. customto be 45° C
  7. temperatureWhile the pH of the slurry was maintained to 8.5
  8. additionwere added to the slurry as a single portion over 90 minutes
  9. waitThe resultant slurry was aged for 30 minutes
  10. stirringThen, under stirring, while the pH of the slurry
  11. temperaturewas maintained to 8.5
  12. additionwere added to the slurry as a single portion over 120 minutes
  13. waitThe resultant slurry was aged for 30 minutes

出典と根拠

ORDレコード
ord-95f5547fb1f149799f092f4895268fd6
出典データセット
uspto-grants-2015_11
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US09193871B2

反応ノート

このページの内容参加物反応条件実験手順後処理出典と根拠反応ノート