[CH2:1]([N:8]1[CH2:13][CH2:12][C:11]([C:14]2[CH:19]=[CH:18][C:17]([N:20]3[CH2:24][C@H:23](CO)[O:22][C:21]3=[O:27])=[CH:16][C:15]=2[F:28])=[CH:10][CH2:9]1)[C:2]1[CH:7]=[CH:6][CH:5]=[CH:4][CH:3]=1.[O:29]1[CH:33]=[CH:32][NH:31][C:30]1=[O:34].[CH2:35](P(CCCC)CCCC)CCC.N(C(N1CCCCC1)=O)=NC(N1CCCCC1)=O>O1CCCC1>[CH2:1]([N:8]1[CH2:13][CH2:12][C:11]([C:14]2[CH:19]=[CH:18][C:17]([N:20]3[CH2:24][C@H:23]([CH2:35][N:31]4[CH:32]=[CH:33][O:29][C:30]4=[O:34])[O:22][C:21]3=[O:27])=[CH:16][C:15]=2[F:28])=[CH:10][CH2:9]1)[C:2]1[CH:3]=[CH:4][CH:5]=[CH:6][CH:7]=1(5R)-3-(4-(1-Benzyl-1,2,5,6-tetrahydropyridin-4-yl)-3-fluorophenyl)-5-hydroxymethyl-oxazolidin-2-one (2.92 g, 7.3 mM; WO 97-30995) was stirred in tetrahydrofuran (60 ml), and 3H-oxazol-2-one (0.69 g, 8.12 mM) and tributylphosphine (1.77 g, 8.75 mM) were added. The mixture was stirred at 0° under nitrogen, and 1,1′-azodicarbonyldipiperidine (2.06 g, 8.18 mM) was added portionwise. The reaction mixture was allowed to warm to ambient temperature and stirred overnight. The precipitate was filtered off and solvent removed. The resulting oil was dissolved in dichloromethane (30 ml), stirred at 0° for 30 minutes, and further precipitate removed. The filtrate was purified by MPLC on silica eluting with a gradient from 60 to 80% ethyl acetate in isohexane, to give a mixture of starting material and product, which was rechromatographed eluting with 3% MeOH in dichloromethane to give the title compound as a white solid (30 mg).