ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

1,3,5-Trichloro-2,4,6-trifluorobenzene → 1,3,5-Trifluorobenzene

HRID 736963
印刷

反応式

HRID 736963 の反応式
Cl[C:2]1[C:7]([F:8])=[C:6](Cl)[C:5]([F:10])=[C:4](Cl)[C:3]=1[F:12].C([O-])(=O)C.[Na+]>[Pd].O>[F:8][C:7]1[CH:2]=[C:3]([F:12])[CH:4]=[C:5]([F:10])[CH:6]=1
参加物反応条件実験手順後処理出典と根拠反応ノート

参加物

5

反応物 2

HCID 675731,3,5-Trichloro-2,4,6-trifluorobenzeneHCID 517045Sodium Acetate

生成物 1

HCID 97451,3,5-Trifluorobenzene収率 88.2%

試薬・触媒・溶媒 2

HCID 23938Palladium触媒HCID 962Water溶媒

反応条件

温度
140 °C

実験手順

このページの内容参加物反応条件実験手順後処理出典と根拠反応ノート

Palladium on carbon (10%, 410 mg), 100 g of water, 21.8 g of 1,3,5-trichloro-2,4,6-trifluorobenzene and 32.9 g of sodium acetate (4.5 equivalents) were placed in a pressure vessel. After flushing with nitrogen, the pressure vessel was heated to 140° C. and pressurized with 12 bar of hydrogen. A hydrogen pressure of 12 bar was maintained at 140° C. for about 12 hours while stirring vigorously. After cooling to 20-25° C., the pressure vessel was depressurized. The two-phase reaction solution was filtered and the phases were then separated. This gave a yield of 88.2% of 1,3,5-trifluorobenzene.

後処理

  1. customAfter flushing with nitrogen
  2. temperatureA hydrogen pressure of 12 bar was maintained at 140° C. for about 12 hours
  3. temperatureAfter cooling to 20-25° C.
  4. customThe two-phase reaction solution
  5. filtrationwas filtered
  6. customthe phases were then separated

出典と根拠

ORDレコード
ord-c4bdb7eec03f462c993e6fd1a1db2208
出典データセット
uspto-grants-2009_09
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US07595426B2

反応ノート