ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

Benzyl Alcohol → (3As,10bs)-8-(benzyloxy)-2-methyl-1,2,3,3a,4,5-hexahydrobenzo[e]pyrrolo[3,4-c]azepin-6(10bh)-one

HRID 84953
印刷

反応式

HRID 84953 の反応式
C(P(C(C)(C)C)C1C(C)=C(C)C(C)=C(C)C=1C1C(C(C)C)=CC(C(C)C)=CC=1C(C)C)(C)(C)C.C(=O)([O-])[O-].[Cs+].[Cs+].Cl[C:42]1[CH:57]=[CH:56][C:45]2[C@H:46]3[CH2:54][N:53]([CH3:55])[CH2:52][C@@H:47]3[CH2:48][NH:49][C:50](=[O:51])[C:44]=2[CH:43]=1.[CH2:58]([OH:65])[C:59]1[CH:64]=[CH:63][CH:62]=[CH:61][CH:60]=1.[OH-].[K+]>C([O-])(=O)C.[Pd+2].C([O-])(=O)C.COC(C)(C)C.C(OCC)(=O)C.C1(C)C=CC=CC=1>[CH2:58]([O:65][C:42]1[CH:57]=[CH:56][C:45]2[C@H:46]3[CH2:54][N:53]([CH3:55])[CH2:52][C@@H:47]3[CH2:48][NH:49][C:50](=[O:51])[C:44]=2[CH:43]=1)[C:59]1[CH:64]=[CH:63][CH:62]=[CH:61][CH:60]=1
参加物反応条件実験手順後処理出典と根拠反応ノート

参加物

10

反応物 5

HCID 244Benzyl AlcoholHCID 10796Cesium carbonateHCID 14797Potassium HydroxideHCID 11953610Di-tert-butyl[3,4,5,6-tetramethyl-2',4',6'-tris(propan-2-yl)-[1,1'-biphenyl]-2-yl]phosphaneHCID 54675190(3As,10bs)-8-chloro-2-methyl-1,2,3,3a,4,5-hexahydrobenzo[e]pyrrolo[3,4-c]azepin-6(10bh)-one

生成物 1

HCID 66821067
(3As,10bs)-8-(benzyloxy)-2-methyl-1,2,3,3a,4,5-hexahydrobenzo[e]pyrrolo[3,4-c]azepin-6(10bh)-one
収率 46.5%

試薬・触媒・溶媒 4

HCID 167845palladium(II) acetate触媒HCID 1140Toluene溶媒HCID 8857Ethyl Acetate溶媒HCID 15413tert-Butyl methyl ether溶媒

反応条件

温度
95 °C

実験手順

Palladium(II) acetate (1.075 g, 4.79 mmol), 2-di-tert-butylphosphino-3,4,5,6-tetramethyl-2′,4′,6′-triisopropyl-1,1′-biphenyl (2.76 g, 5.74 mmol), cesium carbonate (58.5, 179 mmol) and (3aS,10bS)-8-chloro-2-methyl-1,2,3,3a,4,5-hexahydrobenzo[e]pyrrolo[3,4-c]azepin-6(10bH)-one (Example 199, 30.0 g, 120 mmol) were charged to a three-neck 2-L round bottom flask equipped with a magnetic stir bar, thermocouple and a reflux condenser. The flask was purged with argon for about 2 hours. Toluene (240 mL) and benzyl alcohol (248 mL, 2393 mmol) were combined in a separate 1-L round bottom flask that was purged with argon for approximately 60 minutes. This mixture was transferred via cannula to the substrate-containing flask, under argon. The temperature was raised to 95° C. and the reaction solution was stirred at this temperature for 1 hour. The reaction mixture was cooled to room temperature and filtered. The reaction flask and funnel were rinsed with ethyl acetate. The solution was diluted with ethyl acetate (1 L) and then was washed with H2O (210 mL). The organic layer was then washed with a saturated aqueous solution of NaCl (220 mL). The combined aqueous layers were basified with an aqueous solution of 2 M KOH to neutral pH (7) and then seeded (Seed crystals were obtained by the process described for Example 199.) with about 20 mg of product. The solution was then further basified with 2 M KOH to pH=12. The solution was vigorously stirred for 30 minutes and then filtered. The solids were dried under an air flow for 1.5 hours. The solids were then dried under vacuum at room temperature. The material was dissolved in warm methanol and the solution was filtered. The filtrate was concentrated under reduced pressure to give a solid. To the solid was added a mixture of ethyl acetate and tert-butyl methyl ether (100 mL each). After stirring vigorously for 30 minutes, the product was collected by filtration and washed with tert-butyl methyl ether (200 mL) that had been pre-cooled to 0° C. The solids were placed in a vacuum oven, at room temperature, under a nitrogen flow for overnight drying. The solid was harvested to provide the title compound (18.0 g). An alternative preparation of the title compound is described in Example 274. 1H NMR (400 MHz, DMSO-d6) δ ppm 7.96 (dd, J=8.9, 5.3, 1H), 7.46-7.28 (m, 6H), 7.08-7.02 (m, 2H), 5.10 (s, 2H), 3.25-3.00 (m, 4H), 2.83 (dd, J=10.3, 8.6, 1H), 2.64-2.55 (m, 2H), 2.35 (s, 3H), 2.18-2.05 (m, 1H).

後処理

  1. customequipped with a magnetic stir bar
  2. customThe flask was purged with argon for about 2 hours
  3. customwas purged with argon for approximately 60 minutes
  4. temperatureThe reaction mixture was cooled to room temperature
  5. filtrationfiltered
  6. washThe reaction flask and funnel were rinsed with ethyl acetate
  7. additionThe solution was diluted with ethyl acetate (1 L)
  8. washwas washed with H2O (210 mL)
  9. washThe organic layer was then washed with a saturated aqueous solution of NaCl (220 mL)
  10. customwere obtained by the process
  11. stirringThe solution was vigorously stirred for 30 minutes
  12. filtrationfiltered
  13. customThe solids were dried under an air flow for 1.5 hours
  14. customThe solids were then dried under vacuum at room temperature
  15. dissolutionThe material was dissolved in warm methanol
  16. filtrationthe solution was filtered
  17. concentrationThe filtrate was concentrated under reduced pressure
  18. customto give a solid
  19. additionTo the solid was added
  20. stirringAfter stirring vigorously for 30 minutes
  21. filtrationthe product was collected by filtration
  22. washwashed with tert-butyl methyl ether (200 mL) that
  23. temperaturehad been pre-cooled to 0° C
  24. customwere placed in a vacuum oven, at room temperature, under a nitrogen
  25. customfor overnight
  26. customdrying

出典と根拠

ORDレコード
ord-a34b94c20c3249afaa122d2ad80623da
出典データセット
uspto-grants-2014_09
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US08846951B2

反応ノート

このページの内容参加物反応条件実験手順後処理出典と根拠反応ノート