ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

Imidazole → 1H-Imidazole, 1-(1,2,2-trifluoroethenyl)-

HRID 883446
印刷

反応式

HRID 883446 の反応式
[K].N1C=CN=C1.FC(F)(F)C(OCC)=O.[F:16][C:17]([N:22]1[CH:26]=[CH:25][N:24]=[CH:23]1)(F)[CH:18]([F:20])[F:19]>O1CCCC1>[F:16][C:17]([N:22]1[CH:26]=[CH:25][N:24]=[CH:23]1)=[C:18]([F:20])[F:19]
参加物反応条件実験手順後処理出典と根拠反応ノート

参加物

6

反応物 4

HCID 795ImidazoleHCID 9794Ethyl trifluoroacetateHCID 5462222PotassiumHCID 132688751-(1,1,2,2-Tetrafluoroethyl)-1H-imidazole

生成物 1

HCID 674939581H-Imidazole, 1-(1,2,2-trifluoroethenyl)-収率 13%

試薬・触媒・溶媒 1

HCID 8028Tetrahydrofuran
溶媒

反応条件

温度
-78 °C

実験手順

Into a 50 ml autoclave were poured 10.6 g (100 mmol) of potassium salt of imidazole and tetrahydrofuran (30 ml), and the inside of the autoclave was cooled to −78° C., and evacuation and replacement by nitrogen were carried out three times. After the inside of a system was evacuated, TFE was introduced until the inside pressure of the system reached 0.1 MPa·G. Then the temperature of the reaction system was increased to 100° C., and TFE was further introduced to maintain the inside pressure of the reaction system at 0.3 to 0.5 MPa·G. Supply of TFE was stopped when the amount of TFE reached 1.1 equivalents (11 g=110 mmol) to the potassium salt of imidazole, and stirring was continued at 100° C. Fifteen hours after starting of the stirring, the inside of the reaction system was brought to room temperature, followed by evacuation to terminate the reaction. To this crude reaction product was added 2.84 g (20 mmol) of ethyl trifluoroacetate, and it was confirmed by a 19F-NMR analysis based on ethyl trifluoroacetate that 1-(1,1,2,2-tetrafluoroethyl)imidazole had been produced at yield of 13% and 1-(1,2,2-trifluoroethenyl)imidazole had been produced at yield of 56%. Also according to gas chromatography analysis, it was confirmed that 14% of imidazole remained.

後処理

  1. customAfter the inside of a system was evacuated
  2. additionTFE was introduced until the inside pressure of the system
  3. temperatureThen the temperature of the reaction system was increased to 100° C.
  4. additionTFE was further introduced
  5. temperatureto maintain the inside pressure of the reaction system at 0.3 to 0.5 MPa·G
  6. customwas continued at 100° C
  7. customFifteen hours
  8. customwas brought to room temperature
  9. customto terminate
  10. customthe reaction
  11. customTo this crude reaction product

出典と根拠

ORDレコード
ord-889edef6889148c28b243c8d0741c0b1
出典データセット
uspto-grants-2012_08
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US08236887B2

反応ノート

このページの内容参加物反応条件実験手順後処理出典と根拠反応ノート