ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /反応

Methanol → 4-Methyl-2,3,5,6-tetrafluorobenzyl alcohol

HRID 971184
印刷

反応式

HRID 971184 の反応式
CO.[F:3][C:4]1[C:11]([F:12])=[C:10]([CH2:13]Br)[C:9]([F:15])=[C:8]([F:16])[C:5]=1[CH2:6][OH:7]>[Pd].O>[F:3][C:4]1[C:11]([F:12])=[C:10]([CH3:13])[C:9]([F:15])=[C:8]([F:16])[C:5]=1[CH2:6][OH:7]
参加物実験手順後処理出典と根拠反応ノート

参加物

5

反応物 2

HCID 887MethanolHCID 11265752(4-(Bromomethyl)-2,3,5,6-tetrafluorophenyl)methanol

生成物 1

HCID 27342094-Methyl-2,3,5,6-tetrafluorobenzyl alcohol収率 89.4%

試薬・触媒・溶媒 2

HCID 23938Palladium触媒HCID 962Water溶媒

実験手順

The following procedures were carried out in a 1 litre glass autoclave (working volume 350-500 mls) fitted with a dispersion agitator (1000 rpm). H2 gas was fed through a dip-pipe via a Buchi gas controller (Type 6002). The increase/decrease of the temperature is controlled by a Jelabo FP40 external heating/cooling bath. Methanol (362 g, water (6 g, 2,3,5,6-tetrafluoro-4-(bromomethyl)benzyl alcohol (95.1 g 100% wt.), MgO (18.1 g and 5% palladium/carbon catalyst (0.8 g, 100 wt %; Type 58, provided by Johnson Matthey) were charged to the autoclave. The lid was sealed and the autoclave was initially purged with nitrogen to remove residual oxygen (nearly 0), then pressurized to 2.5 bar with hydrogen, and stirred. The pressure was maintained at 2.5 bar by the Buchi controller. The reaction temperature was controlled at 50° C. throughout the reaction by means of the external heating/cooling bath. The reaction was continued until the consumption of hydrogen ceased (typically 60 to 90 minutes). The residual pressure was released and the autoclave purged with nitrogen. The contents of the autoclave were discharged, followed by a small methanol (30 g wash. The spent catalyst and inorganic salts were removed and recovered by filtration. The filter cake was washed with a small amount of methanol (2×30 g. The filtrates and filter-cake washes were combined. On analysis, the reaction had produced 60.4 g of 2,3,5,6-tetrafluoro-4-methylbenzyl alcohol with a yield of 89.4%.

後処理

  1. customfitted with a dispersion agitator (1000 rpm)
  2. temperatureThe increase/decrease of the temperature
  3. customis controlled by a Jelabo FP40 external heating/cooling bath
  4. customThe lid was sealed
  5. customthe autoclave was initially purged with nitrogen
  6. customto remove residual oxygen (nearly 0),
  7. temperatureThe pressure was maintained at 2.5 bar by the Buchi controller
  8. customThe reaction temperature was controlled at 50° C. throughout the reaction by means of the external heating/cooling bath
  9. customThe reaction was continued until the consumption of hydrogen
  10. customtypically 60 to 90 minutes
  11. customthe autoclave purged with nitrogen
  12. washwash
  13. customThe spent catalyst and inorganic salts were removed
  14. filtrationrecovered by filtration
  15. washThe filter cake was washed with a small amount of methanol (2×30 g
  16. filtrationThe filtrates and filter-cake washes

出典と根拠

ORDレコード
ord-fa0ca8c33fcd414dafb1468ac0f1e1d2
出典データセット
uspto-grants-2007_12
DOI
10.6084/m9.figshare.5104873.v1
特許番号
US07312366B2

反応ノート

このページの内容参加物実験手順後処理出典と根拠反応ノート