홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /화합물

나트륨

Sodium

HCID 5360545
새 반응
인쇄
기본 정보개요이름 및 식별자물성안전 및 규제화학 및 산업관련 반응화합물 노트
부분 구조 검색유사 구조 찾기

기본 정보

CAS
7440-23-5
표준 SMILES
[Na]
InChIKey
KEAYESYHFKHZAL-UHFFFAOYSA-N
분자식
Na
평균 분자량
22.9898 g/mol
단동위원소 질량
22.98976928

개요

Sodium appears as a silvery soft metal that becomes grayish white upon exposure to air. Shipped as a solid or molten liquid. Burns violently with explosions that may spatter the material. Used for making gasoline additives, electric power cable, sodium lamps, other chemicals.

이름 및 식별자

우선 이름
Sodium
IUPAC
sodium
현지명
나트륨
영어명
Sodium
분자식
Na
분자량
22.99

이름 및 동의어

SODIUM7440-23-5Natriumsodium atomSodium metalSodioIon Level, SodiumLevel, Sodium IonSodium (NOS)Sodium 23Sodalite 8149CHEBI:26708
이름 더 보기
금속의나트륨금속나트륨나트륨나트륨금속나트륨원자나트륨나트륨원자Metallic sodiumSodium dispersionSodium solutionSODIUM LUMPSNATRIUMMETALLSODIUM STANDARDSODIUM STANDARD SOLUTIONSodium, Oil based standard solution, Specpure(R), Na 5000μg/g
RefChem:6494GMW VITAPET WATERDTXSID1049774DTXCID008764499NEZ333N27231-132-9Nasodium(1+) ion

데이터베이스 식별자

CAS
7440-23-5
PubChem CID
5360545
DTXSID
DTXSID1049774
ChEBI
CHEBI:26708
UNII
9NEZ333N27
EC Number
231-132-9

물성

구조 계산 물성

극성 표면적
0 Ų
수소 결합 공여자 수
0
수소 결합 수용자 수
0
회전 가능 결합 수
0
무거운 원자 수
1
형식 전하
0
복잡도
0

실험 및 물리화학적 성질

Chemical Classes · 3건

Metals -> Elements, Metallic

Flammable agents - 3rd degree

Major ion

CosmeticsCosmetics ingredient -> Bulking/Viscosity
SpringerMaterials Propertieselectron density of states
Density · 5건

0.971 at 68 °F (USCG, 1999) - Less dense than water; will float

0.968 g/cu cm at 20 °C

Ionization potential: 5.139 V; thermal conductivity: 132.3W/m K at 293.15 K; electrical resistivity: 4.77x10-8 Ohm m at 293 K; critical density: 206 kg/cu m; atomic radius in metallic lattice: 189.6 pm

0.97 g/cm³

0.97 @25 °C

Viscosity0.680 cP at 100 °C; 0.284 cP at 400 °C; 0.820 cP at 550 °C
Color/Form · 3건

Light, silvery-white metal; body-centered cubic structure; lustrous when freshly cut; tarnishes on exposure to air, becoming dull and gray; soft at ordinary temperature, fairly hard at -20 °C

Waxlike at room temperature, brittle at low temperatures

Light, soft, ductile, malleable, silver-white metal

Solubility · 3건

Insoluble in benzene, kerosene, naphtha

Dissolves in liquid ammonia to give blue solution: dissolves in mercury, forming sodium amalgam

Solubility in water: reaction

Boiling Point · 4건

1621 °F at 760 mmHg (USCG, 1999)

881.4 °C

880 °C

882.94 °C @760 [mm Hg]

Decomposition · 2건

VIOLENTLY DECOMPOSES WATER, FORMING SODIUM HYDROXIDE & HYDROGEN ... .

Decomp water & alcohol.

Melting Point · 5건

207.5 °F (USCG, 1999)

97.82 °C

Alkali metal; valence 1; naturally occurring isotope (stable): 23 (100%); heat capacity (solid): 0.292 cal/g °C; heat capacity (liquid at melting point): 0.331 cal/g °C; heat of fusion: 27.05 cal/g; reduction potential (aqueous) Na/Na+: 2.714 V; reacts vigorously with oxygen, burning with a yellow flame;; combines directly with the halogens, with phosphorus; reduces most oxides to the elemental state, reduces metallic chlorides; when heated in ammonia gas yields sodamide

97.4 °C

97.794 °C

Vapor Pressure · 3건

1.2 [mmHg]

0.000185 Pa (1.39X10-6 mm Hg) at 400 K (127 °C); 5.60 Pa (0.042 mm Hg) at 600 K (327 °C)

Vapor pressure at 20 °C: negligible

Surface Tension192 dyn/cm at melting point; 161 dyn/cm at 400 °C; 146 dyn/cm at 550 °C

물리화학적 성질

녹는점
97.8 °C · 97.8 °C (lit.)
끓는 점
883 °C · 883 °C (lit.)
밀도
1.04 g/mL · 1.04 g/mL at 20 °C
증기압
1 mm · 1 mm Hg ( 440 °C)
인화점
128 °F · 128 °F
저장 조건
water-free area
용해도
2 O: · H2O: 용해성
물리적 상태
플레이크 크리스탈(대형)
색상
흰색에서 황백색까지
Specific Gravity
0.97 · 0.97
수소이온지수(pH)
5.9 · 5.9 (20°C in H2O)
Flame Color
Bright yellow
냄새
Odorless
수용성
물과 반응
비열
1.23 J/ · Cp(crystal): 1.23 J/(g·K); Cp(gas): 0.9 J/(g·K), at 25℃
Merck
14 · 14,8570
안정성
물과 격렬하게 반응하여 수소를 방출하고 발화할 수도 있음. 가연성 고체. 물, 강한 산화제와 호환되지 않습니다. 산화제 근처에 보관하지 마십시오. 기름이나 건조한 불활성 가스 아래에 보관하십시오. 공기에 민감합니다.
주요 응용
배터리 제조
InChI
1S/Na
InChIKey
MPMYQQHEHYDOCL-UHFFFAOYSA-N
SMILES
[Na]
Hardness, Vickers
0.1 · 0.10
NIST
Sodium(7440-23-5)
EPA
Sodium (7440-23-5)
화학적 성질 · 1건

Sodium is a soft silvery white metallic element. Pyrophoric solid or molten liquid. Odorless, oxidizing rapidly in air; waxlike at room temperature, brittle at low temperatures. Store in airtight containers or in naphtha or similar liquid that does not contain water or free oxygen. Decomposes water on contact, with evolution of hydrogen to form sodium hydroxide; insoluble in benzene, kerosene, and naphtha. Has excellent elec- trical conductivity and high heat-absorbing capacity.

안전 및 규제

안전 정보는 참고용이며, 공급업체의 물질안전보건자료(SDS), 관련 법규 및 전문가 평가를 대체하지 않습니다.

GHS 분류

GHS Classification · 6건

Danger

H260: In contact with water releases flammable gases which may ignite spontaneously [Danger Substances and mixtures which in contact with water, emit flammable gases]

P223, P231+P232, P260, P264, P280, P301+P330+P331, P302+P335+P334, P302+P361+P354, P304+P340, P305+P354+P338, P316, P321, P363, P370+P378, P402+P404, P405, and P501 (click each P-code to see the statement)

Danger

H260 (100%): In contact with water releases flammable gases which may ignite spontaneously [Danger Substances and mixtures which in contact with water, emit flammable gases]

P223, P231+P232, P260, P264, P264+P265, P280, P301+P330+P331, P302+P335+P334, P302+P361+P354, P304+P340, P305+P354+P338, P316, P317, P321, P363, P370+P378, P402+P404, P405, and P501 (click each P-code to see the statement)

유해성 정보

Regulatory Information · 6건

Chemical: Sodium

Hazard Traits - Environmental tox

Sodium is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of Sodium are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)

REACH registered substance: Sodium (EC: 231-132-9)

Sodium: HSNO Approval: HSR001293 Approved with controls

The New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.)

Other Safety InformationIMAP assessments - Sodium: Human health tier II assessment
DOT LabelDangerous When Wet
Fire Hazards · 3건

Special Hazards of Combustion Products: Fumes of burning Na are highly irritating to skin, eyes, and mucous membranes. (USCG, 1999)

· Produce flammable gases on contact with water.

Highly flammable. Many reactions may cause fire or explosion. Gives off irritating or toxic fumes (or gases) in a fire. Risk of fire and explosion on contact with acids, halogens or water.

Fire Potential · 5건

VIOLENTLY DECOMPOSES WATER, FORMING SODIUM HYDROXIDE & HYDROGEN WHICH MAY IGNITE SPONTANEOUSLY.

HEATED SODIUM IS SPONTANEOUSLY FLAMMABLE IN AIR.

... Combustible solid. May ignite spontaneously on exposure to moist air ...

... /Sodium/ is to some extent pyrophoric. Dispersions of sodium in volatile solvents may become pyrophoric if the solvent evaporates round the neck of a container.

The ignition temp of sodium in air depends on size of surface exposed: vapor ignites at room temp; droplets at about 250 °F; an agitated pool at 400 °F; a calm pool at 500 to 800 °F. In the absence of moisture and hydrogen, the reaction is insignificant below 1000 °F.

Health Hazards · 2건

Severe burns caused by burning metal or by caustic soda formed by reaction with moisture on skin. (USCG, 1999)

· Inhalation or contact with vapors, substance or decomposition products may cause severe injury or death.

Hazards Summary · 1건

Can cause second or third degree burns after brief skin contact. [CHRIS] Reacts violently with water releasing hydrogen gas, which will ignite and explode in air; Reacts rapidly with moisture in air or tissues to form caustic sodium hydroxide; [CHEMINFO MSDS]

DOT ID and Guide1428 138
Reactive GroupMetals, Alkali, Very Active
EC ClassificationSymbol: F, C; R: 14/15-34; S: (1/2)-5-8-43-45
UN ClassificationUN Hazard Class: 4.3; UN Pack Group: I
Reactivity AlertsStrong Reducing Agent

안전 및 보호

Fire Fighting · 2건

Excerpt from ERG Guide 138 [Substances - Water-Reactive (Emitting Flammable Gases)]:

Use special powder, dry sand. NO other agents. Combat fire from a sheltered position.

First Aid Measures · 4건

Fresh air, rest. Half-upright position. Artificial respiration may be needed. Refer for medical attention.

Remove contaminated clothes. Rinse skin with plenty of water or shower. Refer for medical attention .

First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.

Rinse mouth. Refer for medical attention .

Accidental Release Measures · 2건

· CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper not available or no answer, refer to appropriate telephone number listed on the inside back cover.

· ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area.

First Aid · 2건

SKIN: brush off any metal, then flood with water for at least 15 min.; treat as heat or caustic burn; call a doctor. (USCG, 1999)

General First Aid:

Safe StorageFireproof. Keep under mineral oil. Dry. Well closed.
Firefighting Hazards... Water reactive ... Evolves hydrogen and ignites on contact with water ...
Exposure Control and Personal Protection· Wear positive pressure self-contained breathing apparatus (SCBA).
Fire Fighting Procedures · 4건

... Improved methods for extinction of liq sodium ... fires are described which involve application of low-melting inorganic powder mixtures which melt and form a protective crust. Mixtures of sodium carbonate or graphite, with lithium carbonate, sodium chloride or sodium fluoride are very effective for sodium.

use approved Class D extinguishers or smother with dry sand, dry clay, or dry ground limestone. DO NOT use carbon dioxide or halogenated extinguishing agents. DO NOT use water. Violent reaction may result.

If material on fire or involved in fire: Do not use water. Do not use carbon dioxide. Use graphite, soda ash, powdered sodium chloride, or suitable dry powder.

Sodium and carbon dioxide are normally unreactive till red-heat has been attained, but mixtures of the 2 solids are impact-sensitive and explode violently. Carbon dioxide is unsuitable as an extinguishant for the burning metal alone, as the intensity of combustion is incr by replacing air with carbon dioxide (72.7% oxygen content). However it has been used successfully to extinguish solvent fires where sodium was also present, since it often fails to ignite because of the blanketing effect of solvent vapor. Conversely addition of kerosene to burning sodium enables the whole to be extinguished with carbon dioxide. Finely divided silica (sand) will often react with burning sodium, so is not entirely suitable as an extinguishant. (Anhydrous sodium carbonate and sodium chloride are suitably unreactive for this purpose) ...

Storage Conditions · 4건

Store in cool, dry, well-ventilated location. Separate from water.

Serum cap closures are safer than screw caps.

Sodium must be stored to avoid contact with water, halogenated hydrocarbons, phosphorus and phosphorus compounds and sulfur and sulfur compounds since violent reactions occur. Protect storage containers from physical damage. Keep in an inert atmosphere or under oil. Requires special precautions to avoid contact with moisture, including condensation from other objects and perspiration. Store in a dry, fire resistive room exclusively for sodium storage. Sprinkler systems should not be used, so keep combustibles away. Remove only the amount of sodium needed for immediate use and place dry in a friction top metal can under a layer of oil. Transport in a special container with a tight fitting cover.

One-pound bricks and smaller amounts may be encountered in chemistry laboratories, where it is usually protected from the air by immersion in an aliphatic oil.

Cleanup Methods · 5건

Keep water away from release. Do not create dust. Shovel into suitable dry container.

Absorb spilled sodium dry, cover remainder with kerosine, paraffin oil or dry sand, eliminate last traces with methylated spirit.

Evacuate persons not wearing protective equipment from area of spill or leak until clean-up is complete. Remove all ignition sources. Put on proper protective equipment. Blanket with appropriate inert material. Scoop up and place in a suitable, sealed container. Ventilare area after clean-up is complete. It may be necessary to contain and dispose of this chemical as a hazardous waste. If material or contaminated runoff enters waterways, notify downstreen users of potentially contaminated waters...

This chemical is a combustible solid. A severe fire risk on contact with water or moisture. Blanket with dry soda-ash, graphite, salt, dry limestone or other approved dry powder. Do NOT use water, carbon dioxide or halogenated extingushers.

For more Cleanup Methods (Complete) data for SODIUM (6 total), please visit the HSDB record page.

Nonfire Spill ResponseExcerpt from ERG Guide 138 [Substances - Water-Reactive (Emitting Flammable Gases)]:
Disposal Methods · 4건

SRP: The most favorable course of action is to use an alternative chemical product with less inherent propensity for occupational exposure or environmental contamination. Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in soil or water; effects on animal, aquatic, and plant life; and conformance with environmental and public health regulations.

Incineration with absorption of oxide fumes.

SCRAPS ... SHOULD BE DESTROYED BY REACTION WITH N-BUTYL ALCOHOL.

In a discussion of safe methods for lab use of sodium, disposal of small quantities (up to 5 to 10 g) by immersion on isopropanol, which may contain up to 2% of water to incr the rate of reaction, is recommended. Quantities up to 50 g should be burned in a heavy metal dish, using a gas flame, (with suitable arrangements for dispersion or absorption of the alkaline particulate smoke so produced).

독성 정보

Toxicological InformationRanking: 580 (total points: 0)
Adverse EffectsDermatotoxin - Skin burns.
Exposure RoutesSerious by all routes of exposure.
Signs and Symptoms · 4건

Cough. Sore throat. Burning sensation.

Pain. Blisters. Serious skin burns.

Severe deep burns. Loss of vision.

Burning sensation. Shock or collapse.

Medical Surveillance · 1건

Before beginning employment and at regular times after that, for those with frequent or potentially high exposure to sodium metal, the following are recommended: lung function tests. If symptoms develop or overexposure is suspected, the following may be useful: consider chest x-ray after acute overexposure.

Natural Pollution Sources · 2건

Occurrence in earth's crust: 2.83% by wt; principal cation in hydrosphere. ... found in form of its cmpd, halides, silicates, carbonates; does not occur free.

Sodium is present in fair abundance in sun and stars. D-lines of sodium are among most prominent in solar spectrum. ... 6th most abundant element on earth ... most abundant of alkali group of metals ... most common cmpd is sodium chloride ... other minerals ... soda niter, cryolite, amphibole, zeolite, sodalite ... .

Human Toxicity Excerpts · 4건

/SIGNS AND SYMPTOMS/ Short-Term Exposure: Inhalation: Contact with water, including perspiration, causes the formation of sodium hydroxide fumes which are highly irritating to skin, eyes, nose and throat. May cause sneezing and coughing. Very severe exposures may result in difficult breathing, coughing, and chemical bronchitis. High exposures can cause pulmonary edema, a medical emergency that can be delayed for several hours. This can cause death. Skin: Contact may cause itching, tingling, thermal and caustic burns and may cause permanent damage. Eyes: May cause tearing, very painful irritation, and burns. Contact with eyes may result in permanent damage and loss of sight. Ingestion: Causes immediate intense burning sensation in mouth, throat and stomach, followed by salivation, vomiting, rapid breathing, symptoms of shock, diarrhea, loss of consciousness and death.

/SIGNS AND SYMPTOMS/ Occasional severe burns of eyes which have been caused by sodium are attributable principally to sodium hydroxide.

/SIGNS AND SYMPTOMS/ Extremely caustic to all tissue.

/SIGNS AND SYMPTOMS/ Corrosive. Causes severe eye and skin burns.

Probable Routes of Human ExposureNIOSH (NOES Survey 1981-1983) has statistically estimated that 262,032 workers (34,622 of these are female) are potentially exposed to sodium in the US(1).
Antidote and Emergency Treatment · 2건

Basic treatment: Establish a patent airway (oropharyngeal or nasopharyngeal airway, if needed). Suction if necessary. Watch for signs of respiratory insufficiency and assist ventilations if necessary. Administer oxygen by nonrebreather mask at 10 to 15 L/min. Monitor for pulmonary edema and treat if necessary ... . Monitor for shock and treat if necessary ... . Anticipate seizures and treat if necessary ... . For eye contamination, flush eyes immediately with water. Irrigate each eye continuously with 0.9% saline (NS) during transport ... . Do not use emetics. For ingestion, rinse mouth and administer 5 ml/kg up to 200 ml of water for dilution if the patient can swallow, has a strong gag reflex, and does not drool ... . If product was ingested, protect yourself from contact with vomitus, since it may cause burns. /Flammable Solids/

Advanced treatment: Consider orotracheal or nasotracheal intubation for airway control in the patient who is unconscious, has severe pulmonary edema, or is in severe respiratory distress. Positive-pressure ventilation techniques with a bag valve mask device may be beneficial. Consider drug therapy for pulmonary edema ... . Monitor cardiac rhythm and treat arrhythmias as necessary ... . Start IV administration of D5W /SRP: "To keep open", minimal flow rate/. Use 0.9% saline (NS) or lactated Ringer's if signs of hypovolemia are present. For hypotension with signs of hypovolemia, administer fluid cautiously. Watch for signs of fluid overload ... . Monitor for signs of hypoglycemia (decreased level of consciousness, tachycardia, pallor, dilated pupils,diaphoresis, and/or readings below 50 mg/dl on dextrose strip 130 or glucometer) and administer 50% dextrose if necessary. Draw blood sample before administration ... . Treat seizures with diazepam or lorazepam ... . Use proparacaine hydrochloride to assist eye irrigation ... . /Flammable solids/

USGS Health-Based Screening Levels for Evaluating Water-Quality · 3건

Sodium

Major ion

Smith, C.D. and Nowell, L.H., 2024. Health-Based Screening Levels for evaluating water-quality data (3rd ed.). DOI:10.5066/F71C1TWP

규제 정보

CERCLA Reportable Quantities · 1건

Persons in charge of vessels or facilities are required to notify the National Response Center (NRC) immediately, when there is a release of this designated hazardous substance, in an amount equal to or greater than its reportable quantity of 10 lb or 4.54 kg. The toll free number of the NRC is (800) 424-8802. The rule for determining when notification is required is stated in 40 CFR 302.4 (section IV. D.3.b).

Clean Water Act Requirements · 1건

Sodium is designated as a hazardous substance under section 311(b)(2)(A) of the Federal Water Pollution Control Act and further regulated by the Clean Water Act Amendments of 1977 and 1978. These regulations apply to discharges of this substance. This designation includes any isomers and hydrates, as well as any solutions and mixtures containing this substance.

State Drinking Water Standards(FL) FLORIDA 160,000 ug/L
State Drinking Water Guidelines(MA) MASSACHUSETTS 20,000 ug/L

안전 데이터

wgk
1
tsca
TSCA listed
rtecs
VY0686000
ridadr
UN 1428
HS 번호
2805110000
risk_code
34-14/15-45-65
hazard_code
C,F,T
safety_code
26-8-6A-45-43D-43-36/37/39-22-7/8-62-5
포장분류
I
위험 등급
4.3
기존화학 물질
KE-31338
자연 발화 온도
>115 °C in air
Hazard Classifications
Eye Dam. 1Skin Corr. 1BWater-react 1
스토리지 클래스
4.3 - Hazardous materials which set free flammable gases upon contact with water
유해 물질 데이터
7440-23-5(Hazardous Substances Data)
함량 및 규제정보
물질구분: 유독물질; 혼합물(제품)함량정보: 나트륨 및 이를 25% 이상 함유한 혼합물
유해화학물질 필터링
97-1-7
사고대비 물질 필터링
41

화학 및 산업

용도 및 제조

Uses · 4건

MFR OF SODIUM CMPD, SUCH AS CYANIDE, AZIDE, PEROXIDE, ETC; IN MFR OF TETRAETHYL LEAD; IN ORG SYNTHESES; FOR PHOTOELECTRIC CELLS; IN SODIUM LAMPS; ALLOYED WITH POTASSIUM IN HEAT TRANSFER MEDIA.

IMPROVE STRUCTURE OF CERTAIN ALLOYS, TO DESCALE METAL, TO PURIFY MOLTEN METALS, IN REDUCTION OF ORG ESTERS.

CHEM INT FOR SODIUM HYDRIDE; CHEMICAL INT & CATALYST IN NUMEROUS MISC APPLICATIONS; REDUCING AGENT FOR METALS.

LABORATORY REAGENT; COOLANT IN NUCLEAR REACTORS; ELECTRIC POWER CABLE (ENCASED IN POLYETHYLENE); RADIOACTIVE FORMS IN TRACER STUDIES & MEDICINE; HEAT TRANSFER AGENT IN SOLAR-POWERED ELECTRIC GENERATORS.

ImpuritiesIMPURITIES: Calcium and Chlorides.
U.S. Imports · 2건

(1972) 2.9X10+5 GRAMS (INCL CESIUM & POTASSIUM)

(1975) 1.98X10+6 G (INCL CESIUM & POTASSIUM)

U.S. Production · 4건

2023: 55,000,000 - <70,000,000 lb

(1972) 1.45X10+11 GRAMS

(1975) 1.31X10+11 GRAMS

(1984) 8.58X10+10 g

Consumption Patterns · 2건

80% AS A CHEMICAL INTERMEDIATE FOR TETRAALKYL LEAD GASOLINE ADDITIVES; 7% AS A REDUCING AGENT FOR METALS; 13% IN OTHER APPLICATIONS (1974)

Lead antiknocks (tetraethyl and tetramethyl lead), 30%; Titanium reduction, 27%; Misc, including catalysts, pulp bleaching metal descaling, dyes, pharmaceuticals, perfumes, and herbicide, 23%; exports, 20% (1985)

Consumer UsesNot Known or Reasonably Ascertainable
Industry UsesFlame retardant
Methods of Manufacturing · 2건

ELECTROLYSIS OF A FUSED MIXTURE OF SODIUM CHLORIDE & CALCIUM CHLORIDE.

PREPARED BY ... ELECTROLYSIS OF FUSED SODIUM HYDROXIDE.

Formulations/Preparations · 3건

GRADES: COMMERCIAL; TECHNICAL; BRICK, AMALGAM; COATED POWDERS; DISPERSIONS ... REACTOR (99.99% PURE)

Available as regular and reactor grades with a min purity of about 99.95%.

Bricks, fused solid: regular and low-calcium grades. Tank car, tank truck, 230-, 280-, 320-, and 420-lb nonreturnable drums.

Household ProductsCosmetics product ingredient: Sodium
General Manufacturing Information · 4건

All Other Basic Organic Chemical Manufacturing

Sodium: ACTIVE

Ethyl phased out its /Baton Rouge, LA/ sodium plant in January, 1985.

Violently decomposes water, forming sodium hydroxide and hydrogen which may ignite spontaneously; decomposes alcohol

응용 분야 · 4건

개요In its ionic form, sodium is one of the most important biological nutrients and is found nearly everywhere on Earth. Although it was isolated as a free metal in 1807 by Sir Humphry Davy and makes up 2.83% of Earth’s lithosphere, it is not found in its metallic form in nature. Pure sodium is extremely reactive, particularly with water to form explosive hydrogen gas and lye (NaOH); it can also react with water vapor in air or biological tissues. Mined and refined salts from terrestrial and aquatic sources contain sodium in the form of sodium chloride, sodium iodide, and other compounds. Natron, a naturally occurring mixture of sodium compounds, has been used since the time of the ancient Egyptians, and sodium compounds are essential to numerous industries, including those involving glass, paper, and soap production. Since it does not occur in its metallic form in nature, pure sodium metal must be produced industrially, which is accomplished via electrolysis of molten sodium chloride.

출처Sodium is the sixth most abundant of the Earth’s elements. Since it is a highly electropositive metal and so reactive with nonmetals, it is not found in its pure elemental form on Earth.Rather, it is found in numerous compounds in relatively abundant quantities. About 2.83%of the Earth’s crust consists of sodium in compounds.Sodium is produced by an electrolytic process, similar to the other alkali earth metals. (Seefigure 4.1). The difference is the electrolyte, which is molten sodium chloride (NaCl, common table salt). A high temperature is required to melt the salt, allowing the sodium cationsto collect at the cathode as liquid metallic sodium, while the chlorine anions are liberated aschlorine gas at the anode: 2NaCl (salt) + electrolysis → Cl2↑ (gas) + 2Na (sodium metal). Thecommercial electrolytic process is referred to as a Downs cell, and at temperatures over 800°C,the liquid sodium metal is drained off as it is produced at the cathode. After chlorine, sodiumis the most abundant element found in solution in seawater.

용도manufacture of sodium Compounds, such as the cyanide, azide, peroxide, etc.; manufacture of tetraethyllead; manufacture of refractory metals; in org syntheses; for photoelectric cells; in sodium lamps; as catalyst for many polymerization reactions. Alloyed with potassium in heat transfer media.

일반 설명Sodium,Na, melts at 97.8°C and boils at 892°C. It is silver-white in color, is soft and malleable, and oxidizes in air. When exposed to air, a silvery soft metal that becomes grayish white upon. It occurs naturally only in the forms of its salts. Shipped as a solid or molten liquid. Burns violently with explosions that may spatter the material. Sodium is used as a chemical intermediate. and in pharmaceuticals, petroleum refining and metallurgy, electric power cable, Sodium lamps, other chemicals.

제조 방법 · 2건

생산 방법Sodium is an essential element needed for all organic life. Sodium is produced commercially through the electrolysis of liquid sodium chloride mixed with calcium chloride in a Downs Cell. Very pure sodium can be isolated by the thermal decomposition of sodium azide (NaN3). Sodium, in its metallic form, can be used to refine some reactive metals, such as zirconium and potassium, from their compounds and is very important in making esters.

염화 나트륨과 염화 칼슘의 용융된 혼합물의 전기분해 용융된 수산화 나트륨의 전기분해에 의해 제조됨

상·하류 제품 정보

상류 원료

염화나트륨염화 스트론슘바륨 클로라이드

하류 제품

SODIUM PHENOLATE TRIHYDRATE에틸알파-포르밀벤젠아세트산에스테르10-(메틸술포닐)카프라마이드3,3-디페닐프로판올Ethyl picolinoylacetate6-Amino-2-methylthio-3-methyluracil2-Amino-4-methoxypyridine4-Methylbenzene-1-carboximidamide hydrochloride2,4-Dimethylquinoline아밀 메틸 카비놀2-메톡시퓨랸4- 아미노 -2- 메틸 피리 미딘 -5- 카보4-Amino-2-mercaptopyrimidine-5-carbonitrile2-Amino-6-hydroxypyrimidin-4(3H)-one ,97%Tiotropium bromide에틸3-아미노티오펜-2-카르복실레이트4-Methoxy-benzamidine2-Amino-4-methoxypyrimidine4,4,4-Trifluoro-1-phenyl-1,3-butanedione4-Amino-2-(trifluoromethyl)pyrimidine-5-carboxylic acid4,6-Diamino-2-mercaptopyrimidine4-Amino-2-methyl-pyrimidine-5-carboxylic acid비스(2-에틸헥실)페닐포스파이트트리페닐틴 클로라이드5-Bromo-2-chloro-4-methoxypyrimidine2-amino-6-chloropyrimidin-4(3H)-one이소프로필글리시딜에테르4-Chlorobenzene-1-carboximidamide hydrochloride4-Methyl-benzamidine4-Chlorobenzamidine hydroiodide과산화나트륨4-Aminopyrimidine-5-carbonitrile6-Amino-1-methyl-5-nitrosouracil3-Octanol2,2'-Dipyridylamine4-Methoxybenzamidine, hydrochloride2,4-DIOXO-4-THIOPHEN-2-YL-BUTYRICACID메틸에스테르2-Ethoxypyrimidin-4-ylamine4-Methyl-2-thiophenecarboxylic acid2-Methyl-1-butanethiol
추가 설명 · 1건

정의sodium: Symbol Na. A soft silveryreactive element belonging to group1 (formerly IA) of the periodic table(see alkali metals); a.n. 11; r.a.m.22.9898; r.d. 0.97; m.p. 97.8°C; b.p.882–889°C. Sodium occurs as thechloride in sea water and in the mineralhalite. It is extracted by electrolysisin a Downs cell. The metal isused as a reducing agent in certainreactions and liquid sodium is also acoolant in nuclear reactors. Chemically,it is highly reactive, oxidizingin air and reacting violently withwater (it is kept under oil). It dissolvesin liquid ammonia to formblue solutions containing solvatedelectrons. Sodium is a major essentialelement required by living organisms.The element was first isolatedby Humphry Davy in 1807.

관련 반응

12,606건
반응 기록 만들기
HRID 807 반응식
HRID 807반응물로
HRID 1081 반응식
HRID 1081반응물로
HRID 1106 반응식
HRID 1106반응물로
HRID 1215 반응식
HRID 1215반응물로
HRID 1413 반응식
HRID 1413반응물로
HRID 1493 반응식
HRID 1493반응물로
HRID 1561 반응식
HRID 1561반응물로
HRID 1751 반응식
HRID 1751반응물로
이전1 / 1576 페이지

화합물 노트

이 페이지에서기본 정보개요이름 및 식별자물성안전 및 규제화학 및 산업관련 반응화합물 노트