5,5'-Bi-2-benzofuran-1,1',3,3'-tetrone
2420-87-3O=C1OC(=O)c2cc(-c3ccc4c(c3)C(=O)OC4=O)ccc21WKDNYTOXBCRNPV-UHFFFAOYSA-N2420-87-3DTXSID8044886CHEMBL3185102안전 정보는 참고용이며, 공급업체의 물질안전보건자료(SDS), 관련 법규 및 전문가 평가를 대체하지 않습니다.
This chemical does not meet GHS hazard criteria for 23% (17 of 74) of reports.
Warning
H315 (71.6%): Causes skin irritation [Warning Skin corrosion/irritation]
P261, P264, P264+P265, P271, P280, P302+P352, P304+P340, P305+P351+P338, P319, P321, P332+P317, P337+P317, P362+P364, P403+P233, P405, and P501 (click each P-code to see the statement)
Aggregated GHS information provided per 74 reports by companies from 8 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.
[5,5'-Biisobenzofuran]-1,1',3,3'-tetrone is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of [5,5'-Biisobenzofuran]-1,1',3,3'-tetrone are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)
REACH registered substance: 4,4'-biphthalic dianhydride (EC: 219-342-9)
All Other Chemical Product and Preparation Manufacturing
[5,5'-Biisobenzofuran]-1,1',3,3'-tetrone: ACTIVE
용도3,3',4,4'-biphenyltetracarboxylic dianhydride be used for the preparation of a polyimide material.
일반 설명3,3′,4,4′-Biphenyltetracarboxylic dianhydride (s-BPDA) is a rigid symmetric polyamide with a diamine having a long distance between amine groups and reactive endgaps.
The preparation of 3,3',4,4'-Biphenyltetracarboxylic dianhydride is as follows:In a nitrogen atmosphere, add N-(3-N,N-dimethylamino-propyl)-4-chlorophthalimide (26.65g, 0.1moL),Zinc powder (3.25g, 0.05moL), anhydrous NiCl2 (127.5mg, 1mmoL),Triphenylphosphine (250mg, 1mmoL) and 70 mL of anhydrous DMAc were stirred at 50°C for 24 hours, and 55mL of solvent DMAc was recovered under reduced pressure. Add 80g of xylene to the system and reflux (recrystallize), filter out the inorganic matter, the clarified filtrate will be cooled and precipitated, filtered, and vacuum dried for 10 hours. 21.8g of 3,3',4,4'-biphenylbisimine was obtained with a yield of 94%. In a 100mL reaction flask, add 4.62g (0.01mol) of the above 3,3',4,4'-biphenylbisimine and 9g of 20% sodium hydroxide aqueous solution, and heat to reflux for 24 hours. Filter and adjust pH=1 with concentrated hydrochloric acid to obtain 3,3’,4,4’-biphenyltetracarboxylic acid. After filtering, wash with water three times and reflux with water with 20mL trimethylbenzene.2.85g of white 3,3′,4,4′-biphenyltetracarboxylic dianhydride was obtained, the yield was 97%.
BPDA (3,3',4,4'-Biphenyltetracarboxylic dianhydride) is a raw material for the polyimide resin component of one of the super-engineering plastics. It is used for many important information and electronic technology products such as mobile phones and copying machines.