Huagongshe화공사 화학 정보 인쇄 보고서 · 연구 참고용
4,4'-디페닐메탄 비스-말린이미드
4,4""""-디페닐메탄비스-말린이미드 · 4,4'-디페닐메탄비스-말린이미드 · 4,4'-디페닐메탄비스-말린이미드(4,4'-DIPHENYLMETHANEBIS-MALEIMIDE) · BMI · 4,4'-Bismaleimidodiphenylmethane · bismaleimides · Bismaleimide, 4,4'-diphenylmethane · Bis(4-maleimidophenyl)methane

식별자 및 물리적 특성
| CAS No. | 13676-54-5 |
|---|---|
| 분자식 | C21H14N2O4 |
| 평균 분자량 | 358.3 g/mol |
| 단동위원소 질량 | 358.09535693 g/mol |
| SMILES | O=C1C=CC(=O)N1c1ccc(Cc2ccc(N3C(=O)C=CC3=O)cc2)cc1 |
| InChIKey | XQUPVDVFXZDTLT-UHFFFAOYSA-N |
| PubChem CID | 83648 |
| ChEMBL | CHEMBL478304 |
| EC No. | 237-163-4 |
| DTXSID | DTXSID8044381 |
| 현지명 | 4,4'-디페닐메탄 비스-말린이미드 |
화학 및 물리적 성질
| XLogP | 2.1 |
|---|---|
| 극성 표면적 | 74.8 |
| 수소 결합 공여자 수 | 0 |
| 수소 결합 수용자 수 | 4 |
| 회전 가능 결합 수 | 4 |
| 무거운 원자 수 | 27 |
| 형식 전하 | 0 |
| 복잡도 | 614 |
| Physical Description | Dry PowderOther Solid |
| Collision Cross Section | 174.3 Ų [M-H]- [CCS Type: DTBuffer gas: N2Ionization: ESI-Dataset: TOXCASTSource Identifier: DTXSID8044381]182.7 Ų [M+Na]+ [CCS Type: DTIonization: ESI+197.5 Ų [M+H]+ [CCS Type: DTIonization: APCI+ |
| 녹는점 | 156-158 °C(lit.) |
| 끓는 점 | 490.79°C (rough estimate) |
| 밀도 | 1.3360 (rough estimate) |
| 증기압 | 0Pa at 25℃ |
| 굴절률 | 1.6800 (estimate) |
| 저장 조건 | Sealed in dry,Room Temperature |
| 용해도 | 물(약간 용해됨) |
| 물리적 상태 | powder to crystal |
| pKa(산도 계수) | -0.40±0.20(Predicted) |
| 색상 | Light yellow to Amber to Dark green |
| 용해도 | 물에 불용성. |
| BRN | 333986 |
| InChI | 1S/C21H14N2O4/c24-18-9-10-19(25)22(18)16-5-1-14(2-6-16)13-15-3-7-17(8-4-15)23-20(26)11-12-21(23)27/h1-12H,13H2 |
| InChIKey | XQUPVDVFXZDTLT-UHFFFAOYSA-N |
| SMILES | O=C1C=CC(=O)N1c2ccc(Cc3ccc(cc3)N4C(=O)C=CC4=O)cc2 |
| LogP(분배 계수) | 1.5 at 25℃ |
| NIST | p,p'-Bis(N-maleimidophenyl)methane(13676-54-5) |
| EPA | 1H-Pyrrole-2,5-dione, 1,1'-(methylenedi-4,1-phenylene)bis- (13676-54-5) |
화학적 성질
yellow to brownish fine crystalline powder
안전 및 규제
| GHS 분류 | DangerH315 (78.7%): Causes skin irritation [Warning Skin corrosion/irritation]H317 (12%): May cause an allergic skin reaction [Warning Sensitization, Skin]H319 (76.4%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]H330 (87.8%): Fatal if inhaled [Danger Acute toxicity, inhalation]H335 (76.2%): May cause respiratory irritation [Warning Specific target organ toxicity, single exposureRespiratory tract irritation]P260, P261, P264, P264+P265, P271, P272, P280, P284, P302+P352, P304+P340, P305+P351+P338, P316, P319, P320, P321, P332+P317, P333+P317, P337+P317, P362+P364, P403+P233, P405, and P501 (click each P-code to see the statement)Aggregated GHS information provided per 648 reports by companies from 14 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. |
|---|---|
| 규제 정보 | Chemical: 1H-Pyrrole-2,5-dione, 1,1'-(methylenedi-4,1-phenylene)bis-1H-Pyrrole-2,5-dione, 1,1'-(methylenedi-4,1-phenylene)bis- is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of 1H-Pyrrole-2,5-dione, 1,1'-(methylenedi-4,1-phenylene)bis- are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)Status: Active Update: 13-05-2022 https://echa.europa.eu/registration-dossier/-/registered-dossier/111191H-Pyrrole-2,5-dione, 1,1'-(methylenedi-4,1-phenylene)bis-: Does not have an individual approval but may be used as a component in a product covered by a group standard. It is not approved for use as a chemical in its own right. |
| Hazard Classes and Categories | Skin Irrit. 2 (78.7%)Skin Sens. 1A (12%)Eye Irrit. 2 (76.4%)Acute Tox. 2 (87.8%)STOT SE 3 (76.2%) |
| 수질 위해 등급(WGK) | 2 |
용도
용도
Bismaleimide products can be used to make bismaleimide resins, modified phenolic resins, modified epoxy thermosetting resins such as heat resistance and PP, PVC, PBT, PMMA and other plastics, as well as high-grade rubber products.
일반 설명
The thermal and mechanical properties of GEEA cured by 1,1′-(methylenedi-4,1-phenylene)bismaleimide were studied.