홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

2,2-Difluoroacetyl fluoride → 2,2-Difluoroacetyl chloride

HRID 1021017
인쇄

반응식

HRID 1021017 반응식
[F:1][CH:2]([F:6])[C:3]([F:5])=[O:4].[Cl-:7].[Ca+2].[Cl-]>>[F:1][CH:2]([F:6])[C:3]([Cl:7])=[O:4].[F:1][CH:2]([F:6])[C:3]([F:5])=[O:4]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 2

HCID 27789142,2-Difluoroacetyl fluorideHCID 5284359Calcium Chloride

생성물 2

HCID 27368902,2-Difluoroacetyl chlorideHCID 27789142,2-Difluoroacetyl fluoride

반응 조건

온도
160 °C

실험 절차

A stainless steel reaction tube having an inner diameter of 23 mm and a length of 400 mm was packed with granular anhydrous calcium chloride (63 g, 120 cc; available from Junsei Chemical Co., Ltd. (particle size: about 2.5 to 3.5 mm)). While flowing nitrogen at 50 cc/min into the reaction tube, the reaction tube was heated at a setting temperature of 160° C. The flow of the nitrogen was stopped simultaneously with feeding the difluoroacetyl fluoride, which had been obtained in Raw Material Preparation Example 1, into the reaction tube at a rate of 0.3 g/min (retention time: 66 seconds). It was observed that a heat spot of 10 to 20° C. was generated in the vicinity of the inlet of the reaction tube and shifted toward the outlet of the reaction tube with the passage of time. The outlet gas was sampled and analyzed over time by the gas chromatograph. It was confirmed by the experimental results that difluoroacetyl chloride (DFAC) and difluoroacetyl fluoride (DFAF) were contained in the gas sample. The experimental results are graphed in FIG. 1.

후처리

  1. customhad been obtained in Raw Material Preparation Example 1, into the reaction tube at a rate of 0.3 g/min (retention time: 66 seconds)
  2. customwas observed that a heat spot of 10 to 20° C.
  3. aliquotThe outlet gas was sampled

출처 및 근거

ORD 기록
ord-38fcbc7a4b93406ea06369d9f175fd18
출처 데이터셋
uspto-grants-2014_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08716526B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트