홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Ammonia → (-)-Noroxymorphone

HRID 1037633
인쇄

반응식

HRID 1037633 반응식
[O:1]1[C@@H:13]2[C@@:14]34[CH2:16][CH2:17][N:18](C)[C@@H:8]([C@:9]3([OH:21])[CH2:10][CH2:11][C:12]2=[O:20])[CH2:7][C:6]2=[C:15]4[C:2]1=[C:3]([OH:22])[CH:4]=[CH:5]2.C(OC(=O)C)(=O)C.N>C1(C)C=CC=CC=1>[O:1]1[C@@H:13]2[C@@:14]34[CH2:16][CH2:17][NH:18][C@@H:8]([C@:9]3([OH:21])[CH2:10][CH2:11][C:12]2=[O:20])[CH2:7][C:6]2=[C:15]4[C:2]1=[C:3]([OH:22])[CH:4]=[CH:5]2
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 222AmmoniaHCID 7918Acetic AnhydrideHCID 5284604Oxymorphone

생성물 1

HCID 5497189(-)-Noroxymorphone

시약·촉매·용매 1

HCID 1140Toluene용매

반응 조건

온도
97.5 °C

실험 절차

A mixture of 4,5α-Epoxy-3,14-dihydroxy-17-methyl morphinan-6-one (32.0 kg), toluene (225 L) and acetic acetic anhydride (32 L) were heated to 95-100° C. and maintained for 8.0 hrs. After reaction completion, the solvent was distilled at 60-65° C. under vacuum and acetic anhydride traces were stripped out with toluene and the residue degassed. Chlorobenzene (290 L), lithium carbonate (23.5 kg), sodium iodide (20.8 kg), DM water (3.2 L) and ethylchloroformate (280 L) were added to the degassed mass and heated to 95-105° C., the reaction was maintained at 95-105° C. for 12.0 hrs. After reaction completion, the solids were filtered and filtrate was concentrated at 70° C. under vacuum and the residue degassed. To the degassed mass acetic acid (96 L) and 15% aqueous sulphuric acid (480 L) was added and the solution was heated to 100-110° C. and maintained at 100-110° C. for 24 hrs. After reaction completion, the reaction mass was cooled to 0-5° C. and pH of the solution was adjusted to ˜4.0 with aqueous ammonia. The aquesous solution was washed with MDC and the aqueous layer was separated. The separated aqueous layer was treated with activated charcoal and filtered. The pH of the filtrate was adjusted to 9-9.5 with aqueous ammonia at below 20° C., the solution was further cooled to 0-5° C. and the product formed was filtered and dried. Yield: 20.3 kg.

후처리

  1. temperaturemaintained for 8.0 hrs
  2. customAfter reaction completion
  3. distillationthe solvent was distilled at 60-65° C. under vacuum and acetic anhydride traces
  4. customthe residue degassed
  5. additionChlorobenzene (290 L), lithium carbonate (23.5 kg), sodium iodide (20.8 kg), DM water (3.2 L) and ethylchloroformate (280 L) were added to the degassed mass
  6. temperatureheated to 95-105° C.
  7. temperaturethe reaction was maintained at 95-105° C. for 12.0 hrs
  8. customAfter reaction completion
  9. filtrationthe solids were filtered
  10. concentrationfiltrate was concentrated at 70° C. under vacuum
  11. customthe residue degassed
  12. additionTo the degassed mass acetic acid (96 L) and 15% aqueous sulphuric acid (480 L) was added
  13. temperaturethe solution was heated to 100-110° C.
  14. temperaturemaintained at 100-110° C. for 24 hrs
  15. customAfter reaction completion
  16. temperaturethe reaction mass was cooled to 0-5° C.
  17. washThe aquesous solution was washed with MDC
  18. customthe aqueous layer was separated
  19. additionThe separated aqueous layer was treated with activated charcoal
  20. filtrationfiltered
  21. customwas adjusted to 9-9.5 with aqueous ammonia at below 20° C.
  22. temperaturethe solution was further cooled to 0-5° C.
  23. customthe product formed
  24. filtrationwas filtered
  25. customdried

출처 및 근거

ORD 기록
ord-b25dd999f1e549caa2dff758596c9dce
출처 데이터셋
uspto-grants-2013_10
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08546572B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트