홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Hydrochloric Acid → 6-Chloro-7-hydroxychroman-4-carboxylic acid

HRID 1047963
인쇄

반응식

HRID 1047963 반응식
[Cl:1][C:2]1[CH:3]=[C:4]2[C:9](=[CH:10][C:11]=1[O:12][Si](C)(C)C)[O:8][CH2:7][CH2:6][C:5]2(O[Si](C)(C)C)[C:17]#N.[OH2:24].[OH2:25].[Sn](Cl)Cl.Cl.C(OC(C)C)(=O)C>O.C(O)(=O)C>[Cl:1][C:2]1[CH:3]=[C:4]2[C:9](=[CH:10][C:11]=1[OH:12])[O:8][CH2:7][CH2:6][CH:5]2[C:17]([OH:25])=[O:24]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 313Hydrochloric AcidHCID 7915Isopropyl AcetateHCID 61436Stannous chloride dihydrateHCID 670803156-Chloro-4,7-bis(trimethylsilyloxy)chroman-4-carbonitrile

생성물 1

HCID 670804286-Chloro-7-hydroxychroman-4-carboxylic acid수율 125.2%

시약·촉매·용매 2

HCID 176
Acetic Acid
용매
HCID 962Water용매2회

실험 절차

A 20-liter 4-neck round-bottom flask was charged with glacial acetic acid (2.04 L), 6-chloro-4,7-bis(trimethylsilyloxy)chroman-4-carbonitrile (2.2 kg, 5.94 mol), and tin(II) chloride dihydrate (3.35 kg, 14.85 mol) and the resulting mixture was stirred at ambient temperature. Concentrated hydrochloric acid (5.0 L, 60 mol) was added, and the resulting mixture was stirred and heated to 80-85° C. for 12 hours. The reaction mixture was cooled to ambient temperature and water (3.6 L) was added, and stirring was continued at ambient temperature for 15 minutes. Isopropyl acetate (11.5 L) and water (5.8 L) were added, and stirring was continued at ambient temperature for 15 minutes. The layers were separated, and the aqueous layer was extracted with isopropyl acetate (2×2 L). The organic layers were combined and washed with brine (3×6 L), then dried over sodium sulfate and concentrated under reduced pressure at a temperature below 50° C. to afford crude 6-chloro-7-hydroxychroman-4-carboxylic acid as a brown semi-solid (1.70 kg, 125% yield).

후처리

  1. stirringthe resulting mixture was stirred
  2. temperatureheated to 80-85° C. for 12 hours
  3. temperatureThe reaction mixture was cooled to ambient temperature
  4. stirringstirring
  5. stirringstirring
  6. waitwas continued at ambient temperature for 15 minutes
  7. customThe layers were separated
  8. extractionthe aqueous layer was extracted with isopropyl acetate (2×2 L)
  9. washwashed with brine (3×6 L)
  10. dry with materialdried over sodium sulfate
  11. concentrationconcentrated under reduced pressure at a temperature below 50° C.

출처 및 근거

ORD 기록
ord-988c999146bd4011a6d721786adee831
출처 데이터셋
uspto-grants-2013_10
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08569522B2

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트