홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

1-Chloro-2,4-Dinitrobenzene → Sodium 2-amino-4-nitrophenoxide

HRID 1065536
인쇄

반응식

HRID 1065536 반응식
[N+](C1C=C([N+]([O-])=O)C=CC=1Cl)([O-])=O.[OH-].[Na+:15].[Cl-].[NH4+].[N+:18]([C:21]1[CH:26]=[C:25]([N+:27]([O-:29])=[O:28])[CH:24]=[CH:23][C:22]=1[O-:30])([O-])=O.[SH-].[Cl-].[Na+]>O>[NH2:18][C:21]1[CH:26]=[C:25]([N+:27]([O-:29])=[O:28])[CH:24]=[CH:23][C:22]=1[O-:30].[Na+:15]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 6

HCID 61-Chloro-2,4-DinitrobenzeneHCID 5234Sodium ChlorideHCID 14798Sodium Hydroxide2회HCID 25517Ammonium ChlorideHCID 167909Phenol, 2,4-dinitro-, ion(1-)HCID 5047209Hydrosulfide

생성물 1

HCID 5485279
Sodium 2-amino-4-nitrophenoxide

시약·촉매·용매 1

HCID 962Water용매2회

반응 조건

온도
90 °C

실험 절차

A suspension of 202.6 parts of 2,4-dinitrochlorobenzene in 300 parts of water and 7 parts of 32.6% strength sodium hydroxide solution is heated to about 90° C., and 256 parts of 32.6% strength sodium hydroxide solution are added at 90° to 95° C. in the course of about 3 hours, whilst stirring. The mixture is subsequently stirred at 90° to 95° C. for about 2 hours and 400 parts of water and 184 parts of ammonium chloride are added to the resulting 2,4-dinitrophenolate suspension, whereupon a pH value of 7.0 is established. 580 parts of a 31.9% strength hydrosulphide solution are then metered in at 70° to 75° C. in the course of about 45 minutes, whilst stirring continuously and continuously monitoring the pH value of the reduction batch, which rises to 8.6. The mixture is subsequently stirred at 70° to 75° C. for about 45 minutes. 40 parts of sodium chloride are then sprinkled in and the reaction mixture is then cooled to about 5° C. and filtered. 410 parts of a 39.6% strength aqueous press cake of sodium 2-amino-4-nitrophenolate, corresponding to 92% of the theoretical yield, are obtained. 410 parts of this press cake are introduced into 1,000 parts of water and are dissolved at pH ~1 with 225 parts of 30% strength aqueous hydrochloric acid. The sulphur is then filtered off and 116 parts of 32.6% strength sodium hydroxide solution are added to the aqueous solution of 2-amino-4-nitrophenol hydrochloride in order to establish a pH of 5. The yellow suspension of 2-amino-4-nitrophenol is subsequently stirred at 5° to 10° C. for about 1 hour and the product which has separated out is isolated by filtration. 324 parts of a 41.9% strength aqueous press cake of 2-amino-4-nitrophenol, corresponding to 135.8 parts of 100% pure 2-amino-4-nitrophenol (88% of theory, relative to 2,4-dinitrochlorobenzene) are obtained. A dried sample has a sulphur content of <0.1% and a melting point of 144° C.

후처리

  1. stirringThe mixture is subsequently stirred at 90° to 95° C. for about 2 hours
  2. customare then metered in at 70° to 75° C. in the course of about 45 minutes
  3. stirringwhilst stirring continuously
  4. stirringThe mixture is subsequently stirred at 70° to 75° C. for about 45 minutes
  5. temperatureis then cooled to about 5° C.
  6. filtrationfiltered

출처 및 근거

ORD 기록
ord-1b4dfe123eae400baec8caa507aaeec1
출처 데이터셋
uspto-grants-1982_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04329503

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트