홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Hydrochloric Acid → 2-Methyl-3-(3-methylphenyl)propan-1-ol

HRID 1073059
인쇄

반응식

HRID 1073059 반응식
[H-].[H-].[H-].[H-].[Li+].[Al+3].[CH3:7][C:8]1[CH:9]=[C:10]([CH:19]=[CH:20][CH:21]=1)[CH2:11][CH:12]([CH3:18])[C:13](OCC)=[O:14].Cl>O1CCCC1>[CH3:18][CH:12]([CH2:11][C:10]1[CH:19]=[CH:20][CH:21]=[C:8]([CH3:7])[CH:9]=1)[CH2:13][OH:14]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 313Hydrochloric AcidHCID 21226445Aluminium lithium hydrideHCID 22157933Ethyl 2-(3-methylbenzyl)-propionate

생성물 1

HCID 221579292-Methyl-3-(3-methylphenyl)propan-1-ol수율 85.6%

시약·촉매·용매 1

HCID 8028Tetrahydrofuran용매2회

실험 절차

500 ml of toluene, 207 g of ground potassium carbonate, 8 g of potassium iodide, 7 g of 18-crown-6 and 209 g of diethyl methylmalonate were initially introduced into a 2 l four-necked flask. The mixture was heated to 85° C. with stirring. 141 g of 3-methylbenzyl chloride were added dropwise in the course of half an hour and the mixture was then stirred at 90° C. for 8 hours. After cooling, the salts were removed by repeatedly shaking with water and the organic layer was distilled. 184 g of diethyl 2-methyl-2-(3-methylbenzyl)-malonate were obtained at a boiling point of 120° C. and a pressure of about 0.02 mbar. For hydrolysis, the ester was boiled under reflux with stirring for 16 hours with 60 g of NaOH, 170 ml of water and a spatula tip-full of tetradecyltrimethylammonium bromide, ethanol which formed in the meantime being distilled off. The dicarboxylic acid was liberated by acidifying with hydrochloric acid, separated off and heated in xylene for 4 hours under reflux for decarboxylation. The monocarboxylic acid was then esterified with ethanol (p-toluenesulfonic acid as catalyst, cyclohexane as entraining agent for water). 115 g of ethyl 2-(3-methylbenzyl)-propionate (boiling point 70°-73° C. at 0.03 mbar) were obtained. For hydrogenation, 21 g of LiAlH4 were dissolved or suspended in 800 ml of tetrahydrofuran in a 2 l four-necked flask under nitrogen. A mixture of 110 g of ethyl 2-(3-methylbenzyl)-propionate and 100 ml of tetrahydrofuran were then added dropwise with ice cooling. The mixture was then decomposed with ice and hydrochloric acid, extracted with ether and dried over K2CO3, and 75 g of 2-methyl-3-(3-methylphenyl)propan-1-ol (boiling point 68°-70° C. at 0.1 mbar) were obtained by distillation.

후처리

  1. additionwere then added dropwise with ice cooling
  2. extractionextracted with ether
  3. dry with materialdried over K2CO3

출처 및 근거

ORD 기록
ord-7a1e4e5436524b0f96af32dbb8797759
출처 데이터셋
uspto-grants-1990_11
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04968668

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트