홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Hydrogen Sulfide → HCID 54295110, 화합물

HRID 1076049
인쇄

반응식

HRID 1076049 반응식
C[O-].[Na+].[Na].[CH3:5][O:6][C:7](=[O:16])[CH:8]=[CH:9][CH2:10][CH2:11][CH2:12][CH2:13][CH2:14][CH3:15].[SH2:17]>CO>[CH3:5][O:6][C:7](=[O:16])[CH2:8][CH:9]([SH:17])[CH2:10][CH2:11][CH2:12][CH2:13][CH2:14][CH3:15]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 402Hydrogen Sulfide2회HCID 8136Nonenoic acid, methyl esterHCID 5360545SodiumHCID 10942334Sodium Methoxide

생성물 1

HCID 54295110HCID 54295110, 화합물

시약·촉매·용매 1

HCID 887Methanol용매

실험 절차

A sodium methylate solution is freshly prepared from 0.3 g of sodium and 5 ml of methanol. 10 g of 2-nonenoic acid methyl ester are added to this solution and the mixture is cooled to -70°. After reaching this temperature, 20 ml of hydrogen sulphide are condensed in and the whole batch is transferred into a pre-cooled autoclave. The pressure-vessel is sealed and immediately heated at 50° in an oil-bath for 3 hours. The autoclave is subsequently cooled to room temperature, the excess hydrogen sulphide vented off and the reaction mixture washed with saturated common salt solution and dried. There are obtained 12.4 g of crude product which, after distillation, yields 5.7 g of pure 3-mercaptononanoic acid methyl ester of boiling point 70°/0.2 mm Hg, nD20 1.4602.

후처리

  1. temperaturethe mixture is cooled to -70°
  2. customcondensed in and the whole batch
  3. customThe pressure-vessel is sealed
  4. temperatureimmediately heated at 50° in an oil-bath for 3 hours
  5. washthe reaction mixture washed with saturated common salt solution
  6. customdried
  7. customThere are obtained 12.4 g of crude product which
  8. distillationafter distillation

출처 및 근거

ORD 기록
ord-8d78f61895194541a6b092108d281c35
출처 데이터셋
uspto-grants-1976_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US03954843

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트