Methyl iodide → Methyl 4-(1-hydroxy-2-methylpropan-2-yl)benzoate

HRID 1105933노트

반응식

HRID 1105933 반응식
S([O-])([O-])(=O)=O.[Ca+2].[CH3:7][C:8]([C:12]1[CH:20]=[CH:19][C:15]([C:16]([OH:18])=[O:17])=[CH:14][CH:13]=1)([CH3:11])[CH2:9][OH:10].[C:21](=O)(O)[O-].[Na+].CI>CN(C)C(=O)C>[CH3:21][O:17][C:16](=[O:18])[C:15]1[CH:14]=[CH:13][C:12]([C:8]([CH3:7])([CH3:11])[CH2:9][OH:10])=[CH:20][CH:19]=1

참가 물질

6

반응물 4

HCID 6328Methyl iodideHCID 24497Calcium SulfateHCID 516892Sodium BicarbonateHCID 204962864-(1-Hydroxy-2-methylpropan-2-yl)benzoic acid

생성물 1

HCID 53801145Methyl 4-(1-hydroxy-2-methylpropan-2-yl)benzoate수율 99%

시약·촉매·용매 1

HCID 31374Dimethylacetamide용매

반응 조건

온도
80 °C

실험 절차

The following reagents were placed in a flask equipped with a magnetic stirrer, oil bath and reflux condenser protected with a guard tube containing anhydrous calcium sulfate ("Drierite"): p-(1,1-dimethyl-2-hydroxyethyl)benzoic acid, 20 g, 0.103 mole; sodium bicarbonate, 9.4 g, 0.112 mole; N,N-dimethylacetamide, 100 mL; and methyl iodide, 28.4 g, 0.2 mole. The mixture was heated at 80° C. for 2.5 hours, cooled to room temperature and filtered to remove any unreacted hydroxyacid. The clear solution was then poured into 600 mL water and stirred for 10 minutes. 50 mL of 5% aqueous sodium bicarbonate was added and the resultant solution extracted 3 times with 120 mL portions of ether. The ether layers were combined, washed with dilute aqueous bicarbonate, dilute aqueous sodium thiosulfate and finally water, and dried over anhydrous potassium carbonate. The ether solution was evaporated to give a colorless liquid which crystallized upon standing at room temperature. Yield 99%. The compound was purified by distillation, bp 135°- 140° C. at 0.3 to 0.5 mm Hg, (0.04 to 0.667 kPa) followed by recrystallization from ether/pentane (1/4 vol.) at -20° C., mp 44°-45° C. Elemental analysis, IR and NMR spectra were all consistent with the proposed structure.

후처리

  1. customThe following reagents were placed in a flask
  2. customequipped with a magnetic stirrer, oil bath
  3. temperaturereflux condenser
  4. customprotected with a guard tube
  5. temperaturecooled to room temperature
  6. filtrationfiltered
  7. customto remove any unreacted hydroxyacid
  8. additionThe clear solution was then poured into 600 mL water
  9. addition50 mL of 5% aqueous sodium bicarbonate was added
  10. extractionthe resultant solution extracted 3 times with 120 mL portions of ether
  11. washwashed with dilute aqueous bicarbonate, dilute aqueous sodium thiosulfate and finally water
  12. dry with materialdried over anhydrous potassium carbonate
  13. customThe ether solution was evaporated
  14. customto give a colorless liquid which
  15. customcrystallized
  16. customupon standing at room temperature
  17. distillationThe compound was purified by distillation, bp 135°- 140° C. at 0.3 to 0.5 mm Hg, (0.04 to 0.667 kPa)
  18. customfollowed by recrystallization from ether/pentane (1/4 vol.) at -20° C.

출처 및 근거

ORD 기록
ord-788f45978e4a4f7b978a2fdcefc1fe35
출처 데이터셋
uspto-grants-1982_01
특허 번호
US04310655

반응 노트

불러오는 중…