반응식
C.[CH3:2][CH2:3][CH2:4][CH2:5]CCCC[CH2:10][CH2:11][CH2:12][CH2:13][CH2:14][CH2:15][CH2:16][CH2:17][N+]1C=CC=CC=1.[Cl-]>>[CH2:2]=[CH:3][CH:4]=[CH2:5].[CH2:17]=[CH:16][C:15]1[CH:10]=[CH:11][CH:12]=[CH:13][CH:14]=1참가 물질
실험 절차
A toner was prepared by extrusion of the above polymer, 92 percent, 6 percent of REGAL 330® carbon black and 2 percent of CPC (cetyl pyridinium chloride charge additive) followed by micronization to 10 microns. The minimum fix temperature of the toner was 230° F. as determined by no cracking of the fused toner images as a result of a 180 degrees paper crease test (paper folded 180 degrees, visually observed the breadth of cracking at crease) and the minimum fix temperature of the toner was 230° F. when no appreciable, for example a peppered, toned image was removed with SCOTCH® Tape Magic 810, and the hot offset temperature was 320° F. where the toned image sticks to silicone roll fuser as indicated herein. When fused, toner images were observed to offset from paper onto a silicone fuser roll, and then was imprinted onto the same paper or subsequent papers. The hot offset temperature, where the toner failed to release from the fuser roll, was 300° F.
후처리
- customwas 230° F.
- customa result of a 180 degrees paper crease test (paper folded 180 degrees
- customwas 230° F.
- customwas removed with SCOTCH® Tape Magic 810
- customwas 320° F.
- customwas 300° F.
출처 및 근거
- ORD 기록
- ord-f3c1f3c7ea234e8ea232d03deb4c1eb4
- 출처 데이터셋
- uspto-grants-1994_06
- 특허 번호
- US05324611
연결된 노트
불러오는 중…