홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Hydrochloric Acid → 4-Sulfamoylbenzene-1-sulfonyl chloride

HRID 1173089
인쇄

반응식

HRID 1173089 반응식
N[C:2]1[CH:7]=[CH:6][C:5]([S:8]([NH2:11])(=[O:10])=[O:9])=[CH:4][CH:3]=1.[ClH:12].N([O-])=O.[Na+].[S:17](=[O:19])=[O:18]>O>[S:8]([C:5]1[CH:6]=[CH:7][C:2]([S:17]([Cl:12])(=[O:19])=[O:18])=[CH:3][CH:4]=1)(=[O:10])(=[O:9])[NH2:11]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 313Hydrochloric AcidHCID 1119Sulfur DioxideHCID 5333SulfanilamideHCID 23668193Sodium Nitrite

생성물 1

HCID 109561594-Sulfamoylbenzene-1-sulfonyl chloride

시약·촉매·용매 1

HCID 962Water용매

실험 절차

25.0 g (145 mmol) of 4-aminobenzenesulfonamide was added to a mixed solution of 80 ml of water and 50 ml of concentrated hydrochloric acid, followed by stirring. To the mixture was added dropwise an aqueous solution (20 ml) containing 10.5 g (152 mmol) of sodium nitrite at −13° C. to −10° C. over 15 minutes. After 10 minutes, the reaction solution was added to a sulfur dioxide saturated mixture solution (solution prepared by saturating a mixed solution of 150 ml of acetic acid and 12.5 ml of concentrated hydrochloric acid with sulfur dioxide and then adding 3.7 g of cuprous chloride thereto) at −30° C. under stirring. After one hour, 500 ml of ice-water was added to the reaction solution, and the precipitates were collected by filtration. The precipitates were dissolved in a mixed solution of 450 ml of toluene and 150 ml of ethyl acetate. After filtering off the insoluble matters, the filtrate was extracted with ethyl acetate. The organic layer was successively washed with an aqueous saturated sodium bicarbonate and brine, and dried over magnesium sulfate. The solvent was evaporated, and 100 ml of toluene was added to the residue. The crystals were collected by filtration, to give 20.9 g of the title compound.

후처리

  1. customprepared
  2. concentrationby saturating a mixed solution of 150 ml of acetic acid and 12.5 ml of concentrated hydrochloric acid with sulfur dioxide
  3. additionadding 3.7 g of cuprous chloride
  4. stirring) at −30° C. under stirring
  5. waitAfter one hour
  6. addition500 ml of ice-water was added to the reaction solution
  7. filtrationthe precipitates were collected by filtration
  8. dissolutionThe precipitates were dissolved in a mixed solution of 450 ml of toluene and 150 ml of ethyl acetate
  9. filtrationAfter filtering off the insoluble matters
  10. extractionthe filtrate was extracted with ethyl acetate
  11. washThe organic layer was successively washed with an aqueous saturated sodium bicarbonate and brine
  12. dry with materialdried over magnesium sulfate
  13. customThe solvent was evaporated
  14. addition100 ml of toluene was added to the residue
  15. filtrationThe crystals were collected by filtration

출처 및 근거

ORD 기록
ord-07fe0f55fa214da38053ddbf5eceac64
출처 데이터셋
uspto-grants-2010_11
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07834049B2

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트