홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Potassium Phosphate, Tribasic → 1-(6-Methylpyridin-3-yl)-2-(4-(methylsulfonyl)phenyl)ethanone

HRID 1183786
인쇄

반응식

HRID 1183786 반응식
[CH3:1][C:2]1[N:7]=[CH:6][C:5]([C:8](=[O:10])[CH3:9])=[CH:4][CH:3]=1.Br[C:12]1[CH:17]=[CH:16][C:15]([S:18]([CH3:21])(=[O:20])=[O:19])=[CH:14][CH:13]=1.P([O-])([O-])([O-])=O.[K+].[K+].[K+].CC1(C)C2C(=C(P(C3C=CC=CC=3)C3C=CC=CC=3)C=CC=2)OC2C(P(C3C=CC=CC=3)C3C=CC=CC=3)=CC=CC1=2>C([O-])(=O)C.[Pd+2].C([O-])(=O)C.CN(C=O)C>[CH3:1][C:2]1[N:7]=[CH:6][C:5]([C:8](=[O:10])[CH2:9][C:12]2[CH:17]=[CH:16][C:15]([S:18]([CH3:21])(=[O:20])=[O:19])=[CH:14][CH:13]=2)=[CH:4][CH:3]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 62657Potassium Phosphate, TribasicHCID 770141-Bromo-4-(methylsulphonyl)benzeneHCID 952923-Acetyl-6-methylpyridineHCID 6360441,1'-(9,9-Dimethyl-9H-xanthene-4,5-diyl)bis(1,1-diphenylphosphine)

생성물 1

HCID 99259911-(6-Methylpyridin-3-yl)-2-(4-(methylsulfonyl)phenyl)ethanone

시약·촉매·용매 2

HCID 167845
palladium(II) acetate
촉매
HCID 6228Dimethylformamide용매

반응 조건

온도
25 °C

실험 절차

1-(6-methylpyridin-3-yl)ethanone 1 (50 g, 370 mmol), 1-bromo-4-(methylsulfonyl)benzene 2 (87 g, 370 mmol), potassium phosphate (235.6 g, 3 equiv, 1.11 mol), palladium(II) acetate (125 mg, 0.15mol, 557 μmol), Xantphos (161 mg, 0.075% mol, 278 μmol) and N,N′-dimethylformamide (300 ml, 6 vol) were introduced in the order into a 2000 ml flask provided with mechanical stirring, thermometer and coolant, at 25° C. and under a nitrogen atmosphere. The reaction mixture was stirred at 25° C. and subject to three cycles of vacuum and nitrogen, then it was heated to 85° C. and stirred at such temperature for 27 h. The reaction mixture was then quenched to 45° C. and the stirring was stopped, promoting the separation of an aqueous phase that was removed by suction siphoning with the aid of vacuum. The resulting higher mixture was diluted with water (600 ml, 12 vol) and was quenched to 3° C. After 2 h stirring at such temperature, the resulting suspension was filtered and the product was washed with water (4×200 ml, 4×4 vol) and dried at 60° C. in vacuum, yielding the raw 1-(6-methylpyridin-3-yl)-2-[4-(methylsulfonyl)phenyl]ethanone of formula (I) (89.1 g, 83.2%) as a yellow solid.

후처리

  1. customprovided with mechanical stirring
  2. customcoolant, at 25° C. and under a nitrogen atmosphere
  3. temperatureit was heated to 85° C.
  4. stirringstirred at such temperature for 27 h
  5. customThe reaction mixture was then quenched to 45° C.
  6. customthe separation of an aqueous phase that
  7. customwas removed by suction
  8. additionThe resulting higher mixture was diluted with water (600 ml, 12 vol)
  9. customwas quenched to 3° C
  10. stirringAfter 2 h stirring at such temperature
  11. filtrationthe resulting suspension was filtered
  12. washthe product was washed with water (4×200 ml, 4×4 vol)
  13. customdried at 60° C. in vacuum

출처 및 근거

ORD 기록
ord-fda5f8b69e74467ba2c32fae7c447b66
출처 데이터셋
uspto-grants-2014_03
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08664402B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트