홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Styrene → Diisobutylene styrene

HRID 1246188
인쇄

반응식

HRID 1246188 반응식
[CH2:1]=[CH:2][C:3]1[CH:8]=[CH:7][CH:6]=[CH:5][CH:4]=1.[CH3:9][C:10]([CH2:12][C:13]([CH3:16])([CH3:15])[CH3:14])=[CH2:11].C(OCCCO)(=O)C=C.C[C@@]12C(C(C([O-])=O)=C)C[C@H](C1(C)C)CC2.C(OCCCC)(=O)C=C>>[CH3:11][C:10]([CH2:12][C:13]([CH3:16])([CH3:15])[CH3:14])=[CH2:9].[CH2:1]=[CH:2][C:3]1[CH:8]=[CH:7][CH:6]=[CH:5][CH:4]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 5

HCID 7501Styrene2회HCID 78682,4,4-Trimethyl-1-penteneHCID 8846Butyl AcrylateHCID 331012-Propenoic acid, 3-hydroxypropyl esterHCID 92004758Isobomyl acrylate

생성물 1

HCID 131724294Diisobutylene styrene

반응 조건

온도
150 °C

실험 절차

Charge 1 was added to a 4-liter stirred stainless steel pressure reactor. The reactor was pressurized with nitrogen providing a 5 psig pad on the reactor. The agitation on the reactor was set at 500 rpm and the reactor temperature was adjusted to 150° C. Charge 2 was added to the reactor at an addition rate of 36 grams/hour over a 2.5 hour period. After 15 minutes Charge 3 was added to reactor at an addition rate of 1000 grams/hour over a 2 hour period. During the monomer addition the temperature was maintained at 150° C. and 60 PSI. After Charges 2 and 3 were in the reactor, the reaction mixture was held for 2 hours. The reactor was than cooled to 25° C. GC analysis of the reaction mixture showed that all acrylates and styrene were reacted. The final solids of the resulting polymer was 83.12,% determined at 110° C. for one hour. The copolymer had Mn=1400 and Mw/Mn=2.4. The 13C NMR spectrum was consistent with a molar copolymer composition of 22.1% diisobutylene, 35.0% hydroxypropyl acrylate, 15.6% isobornyl acrylate, 7.8% styrene, and 19.5% butyl acrylate.

후처리

  1. additionCharge 1
  2. additionwas added to a 4-liter
  3. customwas adjusted to 150° C
  4. additionCharge 2
  5. additionwas added to the reactor at an addition rate of 36 grams/hour over a 2.5 hour period
  6. additionAfter 15 minutes Charge 3
  7. additionwas added to reactor at an addition rate of 1000 grams/hour over a 2 hour period
  8. additionDuring the monomer addition the temperature
  9. temperaturethan cooled to 25° C
  10. customwere reacted
  11. waitdetermined at 110° C. for one hour

출처 및 근거

ORD 기록
ord-1d68c99f180842eda613ce4cfc595067
출처 데이터셋
uspto-grants-2006_10
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07125931B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트