홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Water → 4-Methoxymethyl-2,3,5,6-tetrafluorobenzyl alcohol

HRID 1250789
인쇄

반응식

HRID 1250789 반응식
[F:1][C:2]1[C:7]([F:8])=[C:6]([CH2:9][OH:10])[C:5]([F:11])=[C:4]([F:12])[C:3]=1[CH2:13][OH:14].O.[OH-].[K+].S(OC)(O[CH3:22])(=O)=O>C1(C)C=CC=CC=1>[CH3:22][O:14][CH2:13][C:3]1[C:2]([F:1])=[C:7]([F:8])[C:6]([CH2:9][OH:10])=[C:5]([F:11])[C:4]=1[F:12]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 962WaterHCID 6497Dimethyl Sulfate3회HCID 14797Potassium Hydroxide3회HCID 40988352,3,5,6-Tetrafluoro-1,4-benzenedimethanol2회

생성물 1

HCID 111721164-Methoxymethyl-2,3,5,6-tetrafluorobenzyl alcohol수율 100.8%

시약·촉매·용매 1

HCID 1140
Toluene
용매

반응 조건

온도
60 °C

실험 절차

Into a reaction vessel that was charged nitrogen, 5.00 g (23.1 mmol) of 2,3,5,6-tetrafluoro-1,4-benzenedimethanol, 15.00 g of water and 1.30 g (23.1 mmol) of potassium hydroxide were charged subsequently, and heated to 60° C. with stirring. At this time, solid 2,3,5,6-tetrafluoro-1,4-benzenedimethanol was completely dissolved to be a clear solution. Then, a mixture of 15.0 g of toluene and 3.07 g (23.1 mmol) of dimethyl sulfate was added at 55±5° C. After stirring at 50±5° C. for 1.5 hours, 0.64 g (11.4 mmol) of potassium hydroxide and 1.51 g (12.6 mmol) of dimethyl sulfate were added. After 1.5 hours, 0.66 g (11.7 mmol) of potassium hydroxide and 1.51 g (12.6 mmol) of dimethyl sulfate were further added and stirred at the same temperature for 1.5 hours. Allowing the reaction mixture to cool to room temperature, the layers of the reaction mixture were separated and the water layer was extracted with 30 ml of ethyl acetate. The organic layers were combined, washed with 30 ml of water, concentrated, and dried under reduced pressure to give 5.22 g of crude 4-methoxymethyl-2,3,5,6-tetrafluorobenzenemethanol. The crude 4-methoxymethyl-2,3,5,6-tetrafluorobenzenemethanol was subjected to content analysis by GC internal standard method (Analytical method 1 given later). GC area percentage of the crude product: 87% of the objective compound, 4% of the starting compound and 8% of the by-product compound Content analysis by GC internal standard method: 85% of the objective compound and 86% of the yield of pure compound

후처리

  1. additionwere charged subsequently
  2. additionwas added at 55±5° C
  3. stirringAfter stirring at 50±5° C. for 1.5 hours
  4. stirringstirred at the same temperature for 1.5 hours
  5. temperatureAllowing the reaction mixture to cool to room temperature
  6. customthe layers of the reaction mixture were separated
  7. extractionthe water layer was extracted with 30 ml of ethyl acetate
  8. washwashed with 30 ml of water
  9. concentrationconcentrated
  10. customdried under reduced pressure

출처 및 근거

ORD 기록
ord-b9cc33ac525141d6996a991615b5e238
출처 데이터셋
uspto-grants-2002_01
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06339176B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트