홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Ethoxydimethylsilane → Methacryloxyethoxypropyl dimethyl ethoxysilane

HRID 1252533
인쇄

반응식

HRID 1252533 반응식
[C:1]([O:6][CH2:7][CH2:8][O:9][CH2:10][CH:11]=[CH2:12])(=[O:5])[C:2]([CH3:4])=[CH2:3].[CH3:13][SiH:14]([CH3:18])[O:15][CH2:16][CH3:17]>[Pt]>[C:1]([O:6][CH2:7][CH2:8][O:9][CH2:10][CH2:11][CH2:12][Si:14]([CH3:18])([CH3:13])[O:15][CH2:16][CH3:17])(=[O:5])[C:2]([CH3:4])=[CH2:3]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 2

HCID 61772Ethoxydimethylsilane2회HCID 856092-Propenoic acid, 2-methyl-, 2-(2-propen-1-yloxy)ethyl ester

생성물 1

HCID 53895125Methacryloxyethoxypropyl dimethyl ethoxysilane

시약·촉매·용매 1

HCID 23939Platinum촉매

반응 조건

온도
50 °C

실험 절차

The reaction vessel was a flask equipped with a stirring device, a thermometer, a dropping funnel and fitted with a reflux condenser and a drying tube. The flask charged with about one mole of allyloxyethyl methacrylate and about 1×10-5 moles of a platinum catalyst. The mixture heated to about 50° C. and maintained at 50° C. for 15 minutes. The temperature of the reaction mixture was cooled down to 20° C. with a water bath. When the temperature had reached 20° C., 1.1 moles of dimethylethoxysilane was added to the mixture with the temperature being held at 20° C. during dimethylethoxysilane addition, and stirred for 24 hours. Fractionation of the resulting gave methacryloxyethoxypropyl dimethyl ethoxysilane which had a vacuum boiling point of about 115° C. at 4 mm Hg.

후처리

  1. customequipped with a stirring device
  2. customa thermometer, a dropping funnel and fitted with a reflux condenser and a drying tube
  3. temperaturemaintained at 50° C. for 15 minutes
  4. temperatureThe temperature of the reaction mixture was cooled down to 20° C. with a water bath
  5. customhad reached 20° C.

출처 및 근거

ORD 기록
ord-77b69d812a4b4284b3dfb1aca0f0d427
출처 데이터셋
uspto-grants-1988_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04743667

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트