Dimethylformamide → (αZ)-4-Bromo-α-[(dimethylamino)methylene]benzeneacetaldehyde

HRID 1257802노트

반응식

HRID 1257802 반응식
P(Cl)(Cl)(Cl)=O.[CH3:6][N:7]([CH3:10])[CH:8]=O.[Br:11][C:12]1[CH:17]=[CH:16][C:15]([CH2:18][C:19](O)=[O:20])=[CH:14][CH:13]=1.C(=O)([O-])[O-].[K+].[K+]>C1(C)C=CC=CC=1.C(O)C.O>[Br:11][C:12]1[CH:17]=[CH:16][C:15](/[C:18](=[CH:8]/[N:7]([CH3:10])[CH3:6])/[CH:19]=[O:20])=[CH:14][CH:13]=1

참가 물질

8

반응물 4

HCID 6228DimethylformamideHCID 11430Potassium CarbonateHCID 24813Phosphorus oxychlorideHCID 74654Benzeneacetic acid, 4-bromo-

생성물 1

HCID 13079816(αZ)-4-Bromo-α-[(dimethylamino)methylene]benzeneacetaldehyde

시약·촉매·용매 3

HCID 702Ethanol용매HCID 962Water용매HCID 1140Toluene용매

반응 조건

온도
70 °C

실험 절차

Phosphoryl chloride (55.0 mL, 590 mmol) was added dropwise to N,N-dimethylformamide (80.0 mL) at 0° C. The reaction mixture was stirred at 0° C. for an additional 30 min after which 4-bromophenylacetic acid (43.0 g, 200 mmol) was added portion wise. The resulting mixture was heated at 70° C. overnight. After cooling, the reaction mixture was added slowly to a mixture of ice and water with external cooling. Ice was added intermittently to keep the temperature<10° C. When the quenching was complete, potassium carbonate and ice were added slowly until pH 11 was achieved. Small quantities of ethanol were added to control frothing. To the alkaline mixture was added toluene (120 mL), and the reaction mixture was refluxed for 1.5 hours and cooled to ambient temperature. The aqueous layer was extracted with toluene (2×50 mL). The combined organic extracts were washed with water, dried over sodium sulfate, filtered, and concentrated under reduced pressure. The residue was recrystallized from dichloromethane/hexanes to give the desired product. (26.5 g, 52%) LCMS: (M+H)=281.0/283.0.

후처리

  1. additionwas added portion wise
  2. temperatureAfter cooling
  3. additionIce was added intermittently
  4. customthe temperature<10° C
  5. temperaturethe reaction mixture was refluxed for 1.5 hours
  6. temperaturecooled to ambient temperature
  7. extractionThe aqueous layer was extracted with toluene (2×50 mL)
  8. washThe combined organic extracts were washed with water
  9. dry with materialdried over sodium sulfate
  10. filtrationfiltered
  11. concentrationconcentrated under reduced pressure
  12. customThe residue was recrystallized from dichloromethane/hexanes

출처 및 근거

ORD 기록
ord-00ce1282729e4262a93af0fe261d98ff
출처 데이터셋
uspto-grants-2013_06
특허 번호
US08461330B2

반응 노트

불러오는 중…