홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Sodium aluminate → Sodium aluminosilicate

HRID 1270709
인쇄

반응식

HRID 1270709 반응식
[OH2:1].[Na].[O:3]=[Al-:4]=O.[Na+:6].[O-:7][Si:8]([O-])=O.[Na+].[Na+]>O>[OH2:3].[O-2:7].[O-2:1].[O-2:3].[O-2:3].[O-2:3].[O-2:3].[Na+:6].[Na+:6].[Al+3:4].[Al+3:4].[Si+4:8]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 14766Sodium aluminateHCID 23266Sodium SilicateHCID 71353970Sodium monohydrate

생성물 1

HCID 72941443Sodium aluminosilicate

시약·촉매·용매 1

HCID 962Water용매

반응 조건

온도
100 °C

실험 절차

0.723 g of sodium hydrate (97%) was dissolved in 80 ml of distilled water, and then it was divided into two Teflon reaction containers in halves for each. In one container it was dissolved by adding 8.258 g of sodium aluminate, and in the other container it was dissolved by adding 15.48 g of sodium meta-silicate. Subsequently, gel was formed as a result of adding the silicate solution to the aluminate solution quickly. It was stirred until gel became completely dissolved and then heated at 100° C. for 4 days to obtain zeolite A having Si/Al ratio 1.020 containing impurities. The obtained catalyst was cleaned several times with distilled water and then dried inside an oven at 100° C., and then had a reflux using aqueous solution having 0.1M of ammonium nitrate per 1 g of the catalyst to remove Na ion, which was contained in the catalyst. After this process, the catalyst was cleaned several times with distilled water and dried inside an oven, and then calcined more for 4 hours in the air at 500° C. to obtain pure zeolite A having Si/Al ratio 1.020.

후처리

  1. dissolutionIn one container it was dissolved
  2. dissolutionin the other container it was dissolved
  3. customSubsequently, gel was formed as
  4. customa result
  5. dissolutionbecame completely dissolved

출처 및 근거

ORD 기록
ord-03141f8e27bc48a3b79cd8987148129e
출처 데이터셋
uspto-grants-2007_04
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07202376B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트