홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

4,4'-Difluorobenzophenone → Phthalonitrile

HRID 128849
인쇄

반응식

HRID 128849 반응식
FC1C=CC(C(C2C=CC(F)=CC=2)=O)=CC=1.CC(N(C)C)=O.C(=O)([O-])[O-].[K+].[K+].[N+]([C:32]1[CH:33]=[C:34]([C:40]#[N:41])[C:35](=[CH:38][CH:39]=1)[C:36]#[N:37])([O-])=O>O.C1(C)C=CC=CC=1>[C:40](#[N:41])[C:34]1[C:35](=[CH:38][CH:39]=[CH:32][CH:33]=1)[C:36]#[N:37]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 95824,4'-DifluorobenzophenoneHCID 11430Potassium CarbonateHCID 31374DimethylacetamideHCID 974431,2-Benzenedicarbonitrile, 4-nitro-

생성물 1

HCID 7042Phthalonitrile수율 501.4%

시약·촉매·용매 2

HCID 962Water용매2회
HCID 1140Toluene용매

반응 조건

온도
160 °C

실험 절차

To a 100 ml, 3-necked flask equipped with a thermometer and a Dean-Stark trap was added 5.0 gm (22.9 mmol) of 4,4'-difluorobenzophenone, 8.03 gm (23.9 mmol) of bisphenol A6F, and 50 ml of dimethylacetamide (DMAC). After flushing the mixture for 30 minutes with dry nitrogen, 3.9 gm (28.7 mmol) of pulverized anhydrous potassium carbonate was added with stirring. The reaction mixture was stirred at 70° C. for 1 hour. Toluene was added to the Dean-Stark trap and to the reaction vessel (4 ml). The reaction mixture was refluxed at 145°-150° C. for 24 hours. Water which formed as a by-product was removed by azeotropic distillation. The toluene was removed by distillation while heating to 160° C. Upon cooling to 50° C., 3.10 gm (17.9 mmol) of 4-nitrophthalonitrile was added. Since the reaction mixture was somewhat viscous, the temperature of the mixture was increased to 110° C. and held at this temperature for 18 hours (overnight). FTIR spectroscopy showed the absence of hydroxy and nitro bands. The room temperature mixture was then poured into 300 ml of water with stirring to break the precipitate into a powdery form. The solid precipitate was collected by suction filtration, washed exhaustively with water, and dried to afford 11.5 gm of oligomeric phthalonitrile monomer.

후처리

  1. customTo a 100 ml, 3-necked flask equipped with a thermometer
  2. additionwas added
  3. stirringThe reaction mixture was stirred at 70° C. for 1 hour
  4. temperatureThe reaction mixture was refluxed at 145°-150° C. for 24 hours
  5. customwas removed by azeotropic distillation
  6. customThe toluene was removed by distillation
  7. temperatureUpon cooling to 50° C.
  8. temperaturethe temperature of the mixture was increased to 110° C.
  9. custom(overnight)
  10. stirringwith stirring
  11. filtrationThe solid precipitate was collected by suction filtration
  12. washwashed exhaustively with water
  13. customdried

출처 및 근거

ORD 기록
ord-1d68e98a815848f2ac1359ef9e680312
출처 데이터셋
uspto-grants-1995_11
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05464926

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트