홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

4,4'-Difluorobenzophenone → Phthalonitrile

HRID 128850
인쇄

반응식

HRID 128850 반응식
FC1C=CC(C(C2C=CC(F)=CC=2)=O)=CC=1.CN1C(=O)CCC1.C(=O)([O-])[O-].[K+].[K+].[N+]([C:33]1[CH:34]=[C:35]([C:41]#[N:42])[C:36](=[CH:39][CH:40]=1)[C:37]#[N:38])([O-])=O>O.C1(C)C=CC=CC=1>[C:41](#[N:42])[C:35]1[C:36](=[CH:39][CH:40]=[CH:33][CH:34]=1)[C:37]#[N:38]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 95824,4'-DifluorobenzophenoneHCID 11430Potassium CarbonateHCID 13387N-methyl-2-pyrrolidoneHCID 974431,2-Benzenedicarbonitrile, 4-nitro-

생성물 1

HCID 7042Phthalonitrile수율 386%

시약·촉매·용매 2

HCID 962Water용매2회
HCID 1140Toluene용매

실험 절차

To a 100 ml, 3-necked flask equipped with a thermometer and a Dean-Stark trap was added 2.0 gm (9.2 mmol) of 4,4'-difluorobenzophenone, 6.16 gm (18.3 mmol) of bisphenol A6F, and 50 ml of N-methyl pyrrolidinone (NMP). After flushing the mixture for 30 minutes with dry nitrogen, 5.0 gm (36.2 mmol) of pulverized anhydrous potassium carbonate was added with stirring. The reaction mixture was stirred at 70° C. for 1 hour. Toluene was added to the Dean-Stark trap and to the reaction vessel (4 ml). The reaction mixture was refluxed at 175°-180° C. for 12 hours. Water which formed as a by-product was removed by azeotropic distillation. The reaction temperature was reduced to 160° C. and the toluene was sweep out of the reaction vessel by removing the glass stopper from the 3-necked flash. When the temperature reached 180° C., it was assumed that the toluene had been removed. Upon cooling to room temperature, 3.17 gm (18.4 mmol) of 4-nitrophthalonitrile was added. The temperature of the mixture was increased to 100° C. and held at this temperature for 4 hours. FTIR spectroscopy showed the absence of hydroxy and nitro bands. The room temperature mixture was then poured into 300 ml of water with stirring. The solid precipitate was collected by suction filtration, washed exhaustively with water, and dried to afford 9.1 gm of oligomeric phthalonitrile monomer.

후처리

  1. customTo a 100 ml, 3-necked flask equipped with a thermometer
  2. additionwas added
  3. stirringThe reaction mixture was stirred at 70° C. for 1 hour
  4. temperatureThe reaction mixture was refluxed at 175°-180° C. for 12 hours
  5. customwas removed by azeotropic distillation
  6. customwas reduced to 160° C.
  7. customby removing the glass stopper from the 3-necked flash
  8. customreached 180° C.
  9. customhad been removed
  10. temperatureThe temperature of the mixture was increased to 100° C.
  11. stirringwith stirring
  12. filtrationThe solid precipitate was collected by suction filtration
  13. washwashed exhaustively with water
  14. customdried

출처 및 근거

ORD 기록
ord-d373e563141742c0afbd4d4552ad0221
출처 데이터셋
uspto-grants-1995_11
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05464926

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트